Using The Mm 450; Switching The Headset On/Off - Sennheiser Travel MM 450 Instruction Manual

1
5
1
5

Using the MM 450

Switching the headset on/off

CAUTION! Hearing damage due to high volumes!
Listening at high volume levels for long periods can lead to
permanent hearing defects. Please protect your hearing.
Sennheiser headsets also sound exceptionally good at low
volumes.
Set the volume to a medium level.
Switching the headset on
Press the Master button
flashes blue. You hear an ascending beep.
– When switching the headset on
go into pairing mode.
The headset is waiting to be paired with a Bluetooth enabled device
(see page 10).
– When the headset is already paired with an audio
Bluetooth connection is automatically established. You hear an
ascending beep and then your audio source.
– When the headset is already paired with an audio source
audio source is switched off
blue.
The headset will try for 3 minutes to connect to one of the 5 known
audio sources. If this fails, the headset automatically switches off.
Switching the headset off
Press the Master button
flashes 3 times red.
You hear a descending beep. The Bluetooth connection is automatically
deactivated. The headset switches off.
Using the MM 450
and keep it pressed until the
for the first time, it will automatically
or out of range, the Star
and keep it pressed until the
Star LED
source, the
but the
LED flashes
Star LED
15
DE
EN
FR
IT
ES
NL