Operating Instructions
Operating Instructions
How to insert the Batteries
1. Remove the battery cover by pulling it according to the arrow
direction.
2. Insert new batteries making sure that the (+) and (-) of battery are
installed correctly.
3. Reattach the cover by sliding it back into position.
NOTICE
Use 2 AAA(1.5volt) batteries.
Do not use rechargeable batteries.
Storage and Tips for using the Remote Controller
• The remote controller may be stored by mounting
it on a wall.
Signal Receptor
Receives the signals from the remote control.(Signal receiving sound: two short beeps or one long beep.)
Operation Indication Lamps
On/Off
Sleep Mode
Timer
Defrost Mode
OUT
OUTDOOR UNIT
DOOR
OPERATION
88
Display
Plasma
PLASMA
*Hot Start operation: Stops the indoor fan in Heating Operation to prevent cold air from blowing out from unit.
12 Room Air Conditioner
: Lights up during the system operation.
: Lights up during Sleep Mode Auto operation. (Without plasma model only)
: Lights up during Timer operation.
Lights up during Sleep Mode Auto operation.
(Plasma model only)
: Lights up during Defrost Mode or
Start operation (Heat pump model only)
: Lights up during outdoor unit operation.
(Cooling model only)
: Indicates the setting temperature
: Lights up during plasma operation (Plasma model only)
• To operate the room air conditioner, aim the
remote controller at the signal receptor.
*Hot
Operation indicating
lamps