(EN 6055-3 Norm). IMP OR T ANT € P leas e read this owner's manual carefully and thoroughly before ins talling and operating your room air conditioner. € P leas e retain this owner's manual for future reference after reading it thoroughly.
Just a little preventive care on your part can save you a great deal of time and money over the life of your air conditioner. You'll find many answers to common problems in the chart of troubleshooting tips. If you review our chart of Troubleshooting Tips first, you may not need to call for service at all.
Safety Precautions To prevent injury to the user or other people and property damage, the following instructions must be followed. Incorrect operation due to ignoring instruction will cause harm or damage. The seriousness is classified by the following indications. WARNING This symbol indicates the possibility of death or serious injury.
Page 4
• It may cause fire and electric shock accident. Do not use the power cord close to the heating tools. • It may cause fire and electric shock. Ventilate before operating air conditioner when gas goes out. • It may cause explosion, fire and, burn. Installation...
Page 5
After taking the power-plug out from the socket, contact with the service center. Safety Precautions Do not clean the air conditioner with water. • Water may enter the unit and degrade the insulation. It may cause an electric shock. When cleaning the unit, first make sure the power and breaker are turned off.
1. Do not touch the metal parts of the unit when removing the filter. Injuries can occur when handling sharp metal edges. 2. Do not use water to clean inside the air conditioner. Exposure to water can destroy the insulation, leading to possible electric shock.
: Indicates the setting temperature (Plasma model only) Plasma : Lights up during plasma operation (Plasma model only) PLASMA Operating Instructions • To operate the room air conditioner, aim the remote control at the signal receptor. Signal receptor Operation indication lamps Owner’s Manual 7...
Auto Operation or Auto Changeover Healthy Dehumidification Operation Heating Operation • Cooling Model( ), Heat Pump Model( 8 Room Air Conditioner START/STOP BUTTON Operation starts when this button is pressed and stops when the button is pressed again. OPERATION MODE SELECTION BUTTON Used to select the operation mode.
Cooling Operation Natural wind by the CHAOS logic o For more fresh feeling than other fan speed, press the Indoor Fan Speed Selector and set to CHAOS mode. In this mode, the wind blows like natural breeze by automatically changing fan speed according to the CHAOS logic.
Page 10
During Auto Operation, pressing the chaos swing button makes the horizontal louvers swing up and down automatically. If you want to stop auto-swing, press the chaos swing button again. 10 Room Air Conditioner Press the Start/Stop button. The unit will respond with a beep.
Page 11
Auto Changeover Operation(Optional) During Auto changeover Operation: The air conditioner changes the operation mode automatically to keep indoor temperature. When room temperature vary over ±2°C with respect to setting temperature, air conditioner keeps the room temperature in ±2°C with respect to setting temperature by auto changeover mode.
During the healthy dehumidification function, the airflow volume is automatically set according to the optimization algorithm responding to the current room temp. status which makes the room condition healthy and comfortable even in the high humidity season. 12 Room Air Conditioner Press the Start/Stop button. The unit will respond with a beep.
Page 13
Heating Operation(Heat pump model only) Natural wind by the CHAOS logic o For more fresh feeling than other fan speed, press the Indoor Fan Speed Selector and set to CHAOS mode. In this mode, the wind blows like natural breeze by automatically changing fan speed according to the CHAOS logic.
In order to return to the normal cooling mode from the JET COOL mode, you just press either the operation mode selection button, airflow volume selection or temp. setting button or the JET COOL button again. 14 Room Air Conditioner Press the Start/Stop button. The unit will respond with a beep.
Page 15
PLASMA Purification Operation(Optional) PLASMA Air Purifying Operation only Press the Start/Stop button. The unit will respond with a beep. Open the door on the remote control. Press the PLASMA air purifying operation ON/OFF button. Operation will start when the button is pressed and stop when the button is pressed again.
Page 16
Operating Instructions 2nd F Operation CANCEL AUTO CLEAN 16 Room Air Conditioner Press the Start/Stop button. The unit will respond with a beep. Open the door of the remote control and press the 2nd Function button to operate functions printed in blue at bottom of buttons.
Additional features Sleep Mode Press the Sleep Mode Auto button to set the time you want the unit to turn off automatically. The Timer is programmed in one-hour increments by pressing the Sleep Mode Auto button 1 to 7 times. The sleep mode is available for 1 to 7 times.
Press the Horizontal Airflow Direction Control Button again to set the vertical louver at the desired airflow direction. 18 Room Air Conditioner NOTICE If you press the CHAOS swing button, at first 5 cycles, the horizontal louver will swing up and down at maximum angle.
Air Circulation Mode Circulates the room air without cooling or heating. Press the Start/Stop button. the unit will respond with a beep. Open the door on the remote control. Press the Air Circulation button. Close the door on the remote control. Now each time that you press the Indoor Fan Speed Selector, the fan speed is shifted from low to CHAOS and back to low again.
NANO PLASMA Filter Don’t touch this PLASMA Filter within 10 seconds after opening the inlet grille, it may cause an electric shock. 20 Room Air Conditioner o Never use any of the followings: • Water hotter than 40°C Could cause deformation and/or discoloration.
Replacement of Purifying Filter(Optional) • Recomended use period : About 2 years Open front panel and remove air filters. Air filter Reinsert air filters and close front panel. Outdoor Unit Outdoor Unit The heat exchanger coils and panel vents of the outdoor unit should be checked regularly.
Maintenance and Service When the air conditioner is not going to be used for a long time. When the air conditioner is not going to be used for a long time. When air conditioner is not going to be used for a long time.
• Condensation occurs when the airflow from the air conditioner cools the warm room air. • This is the protector of the mechanism. • Wait about three minutes and operation will begin.