1. Manuals
  2. Brands
  3. Qomo Manuals
  4. Digital Presenters
  5. QD600
  6. Manual

Qomo QD600 Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
PRECAUTIONS
Please follow these precautions:
To prevent fire or shock hazard, do not expose the unit to rain or
moisture.
To prevent electrical shock, do not open the cabinet. Refer to qualified
personnel for service only.
Do not use the unit continuously for more than 24 hours with camera
auto focus on. It may cause damage to the camera lens.
Be careful not to spill water or other liquids onto the unit, or allow
combustible or metallic objects to get inside the cabinet.
Unplug the visualizer from the wall outlet when it is not being
used for a long period of time.
Clean the cabinet with a soft cloth lightly moistened with a mild
detergent solution.
Clean the lens carefully with an air spray or soft dry cloth to avoid
scratching it.
When the lamps flash or become dark, they should be replaced with
new ones.
Avoid switching arm lights and back light frequently.
Remove the camera lens cap before power the unit on.
CONTACTS:
QOMO Hitevision, LLC
Toll Free: 1-866-990QOMO
E-Mail: info@qomo.com
Web: www.qomo.com
1

Advertisement

Table of Contents
loading

Related Manuals for Qomo QD600

Summary of Contents for Qomo QD600

  • Page 1 When the lamps flash or become dark, they should be replaced with new ones. Avoid switching arm lights and back light frequently. Remove the camera lens cap before power the unit on. CONTACTS: QOMO Hitevision, LLC Toll Free: 1-866-990QOMO E-Mail: info@qomo.com Web: www.qomo.com...

  • Page 2: Table Of Contents

    CONTENTS: PARTS IDENTIFICATION ..............3 CONTROL PANEL ................3 BUTTON INSTRUCTION ..............4 REMOTE CONTROL ................5 CONNECTIONS..................6 BASIC PREPARATIONS ............... 6 OUTPUT MODE AND VERTICAL FREQUENCY (60Hz) ...... 9 PAL/NTSC VIDEO OUTPUTS............... 9 INSTALLING VISUALIZER SOFTWARE..........9 USB CAPTURE FOR MAC COMPUTER..........11 WORKING ON THE STAGE ..............11 WORKING OUTSIDE THE STAGE............11 LIGHT....................11...

  • Page 3: Parts Identification

    FOLDING THE UNIT................18 SPECIFICATIONS................19 TECHNICAL SUPPORT..............21 PARTS IDENTIFICATION Camera Camera stand Arm lights Button instruction Connectors Back light Connectors Remote control slot Stage Operation panel CONTROL PANEL POWER (Control the visualizer On/Off) Mir ( V-reverse the image ) Frz (Freeze the image) Neg (Display film negatives) Title (Freeze the top 1/8 of the screen)

  • Page 4: Button Instruction

    Split (Image Split function) (Increase and decrease the volume) CCD (Select to output CCD signal) PC1/PC2 (Select to output computer1/computer 2 signal) LAMP (Control the arm lights and back light) AUTO (To auto adjust white balance and auto focus) (Increase and decrease the magnification) Remarks: Frz, Title, D./S.

  • Page 5: Remote Control

    REMOTE CONTROL POWER (Control the visualizer On/Off) FREEZE (Freeze the image) NEG (Display film negatives) MIRROR (V-Reverse the image) LAMP (Control the arm lights and back light) D./S. ( Switch between static mode and dynamic mode) B&W (Switch between color mode and B&W mode) SPLIT (Image split function) TITLE (Freeze the top 1/8 of the screen) XGA (Set output signal resolution as XGA (1024 x 768) mode)

  • Page 6: Connections

    FAR/NEAR (Focus near or far) CCD (Select to output CCD signal) PC1 (Select to output computer 1 signal) PC2 (Select to output computer 2 signal) RED +/- (Increase/decrease the red hue) BLUE +/- (Increase/decrease the blue hue) BRIGHT +/- (Increase/decrease the brightness) VOLUME+/- (Increase or decrease the volume) Remarks: FREEZE, TITLE, D./S.
  • Page 7 2. Open the arm lights and rotate the camera head until they are in proper positions. Arm lights 3. Making connections: Before making any connection, turn off all the power, including power of the visualizer and the equipment to be connected. Step 1: Connect power source.
  • Page 8 Rear Panel AUDIO VIDEO S-VIDEO AUDIO IN PROJECTOR OUT -COMPUTER- IN OUT-12V- IN RGB Input Screen Projector Connect visualizer’s PROJECTOR port to the RGB IN port of the projector port with the RGB cable provided together the visualizer. Step 3: Connect to a desktop computer. Rear Panel To the Monitor...

  • Page 9: Output Mode And Vertical Frequency (60Hz)

    Side Panel RGB IN AUDIO IN RS232 RS-232 cable USB cable RS 232 connector of the computer USB connector of the computer Use the computer RS232 cable (9-pin to 9-pin) to make the connections shown below to control the visualizer from an external computer.
  • Page 10 Media Player or its own player. Insert the CD-ROM that comes with your visualizer into the CD-ROM drive. Click the Code-Writing folder to install Code-Writing Program. C. Click the DirectX9.0 folder to install Microsoft DirectX 9.0. D. Click the Capture Program folder to install the program that captures images in the AVI or JPG format.

  • Page 11: Usb Capture For Mac Computer

    USB CAPTURE FOR MAC COMPUTER Copy the folder “Mac Driver” into Mac hard disk, open the folder and double-click Empia 1.0.0b2.zip, the “setup” file appears. Follow dialog-box messages, click “next” and finish installation. Note: 1. Please connect Mac computer and visualizer when installing 2.

  • Page 12: Adjusting Image Size

    The arm lights turn on The back light turns on All the lights turn off ADJUSTING IMAGE SIZE In order to reduce or enlarge the image size displayed on the screen, press the “ T” or “ ” button. WORKING WITH NEGATIVES The visualizer is automatically set to display normal materials on the screen when the power is on.

  • Page 13: Freezing Image

    Press the “AUTO” button to adjust the white balance automatically. AUTO ADJUSTMENT One of the QD600’s special functions is auto adjustment. Press the “AUTO” button to auto adjust the white balance and the focus. The whole process takes about 10 seconds.

  • Page 14: Color And B&W Mode Switch

    (On the remote control) COLOR AND B&W MODE SWITCH Press “B&W” once to enter the Black & White mode; Press again to return to the Color mode. SWITCHABLE INPUTS Use the “CCD” button to output CCD signal, use the “PC1/PC2” button to output computer 1 or computer 2 signal.

  • Page 15: Dynamic/Static Mode Switch

    Note: This function is not available on S-Video and Video output. INFRARED REMOTE CONTROL The QD600’s remote control can control the camera from different angels. Please note that an infrared remote control can only be used up to a certain distance to the unit. Objects situated between the visualizer and the infrared remote control and a weak battery may interfere with the reception.

  • Page 16: Video Display And Capture

    visualizer can be used as a 3-D scanner for your computer. Connect the Visualizer to your computer with the supplied USB cable. The Visualizer Software is available on the supplied CD-ROM. VIDEO DISPLAY AND CAPTURE A. Static Images Snap Select [Start] -> [All Programs] -> [VideoCap] –> “VideoCap” to open the VideoCap.exe.

  • Page 17: Controlling The Visualizer From A Computer

    “Windows Media Player” or “ActiveMovie control”. You can also click [File] -> [Display Captured Video Stream] to play video stream in the VideoCap program. E. Set the Frame Rate Click [Capture] -> [Set Frame Rate], and click open “Choose Frame Rate”...
  • Page 18 FOLDING THE UNIT 1. Fold the right arm light down first onto the base, then the left arm down. Rotate the camera head clockwise until the camera head is parallel to the camera stand. 2. Carefully Fold the camera stand down to the front panel. Cautions: a.
  • Page 19 c. Don’t try to pick up this unit by pulling the camera stand. NOT THIS WAY SPECIFICATIONS Color system NTSC or PAL system Pickup device 1/4″professional CCD Resolution XGA (1024 x 768), SVGA(800 x 600) Total Pixels 470,000 RGB Output Pixels 780,000 16 x optical zoom, 8 x digital zoom Lens...
  • Page 20 MIC: Mini jack 1 Input connectors PC Audio: Mini jack 2 RGB: DB15FLC 2 RGB DB15FLC 2 C-Video: RCA jack 1 Output connectors S-Video: 4 pin mini Din 1 Audio: Mini jack 1 Operating system Windows 2000/XP USB connector 30 frames/sec RS-232 connector 9-pin, D-Sub, male/6-pin PS/2 USB port...
  • Page 21 Product serial number(s) Detailed and specific questions Online Technical support is also available online at QOMO’s web site at www.qomo.com, you can enter your questions and concerns through our online form. Or you can email us at info@qomo.com. Copyrights © 2004 QOMO Hitevision, LLC. All Rights Reserved.

Table of Contents