Table of Contents
Advertisement
Quick Installation Guide
WN3501C Wireless USB Adapter
Introduction
Accton's WN3501C Wireless USB Adapter is an 11 Mbps wireless network adapter
that seamlessly integrates with existing Ethernet networks to support applications
such as mobile users or temporary conferences. This solution offers fast, reliable
wireless connectivity with considerable cost savings over wired LANs (which include
long-term maintenance overhead for cabling.) Just plug wireless adapters into your
desktop PCs and start networking.
Using this adapter in conjunction with an Accton Wireless Access Point or Wireless
Access Point/Bridge, you can create an instant network that integrates seamlessly
with 10 Mbps Ethernet LANs. Moreover, moving or exanding your network is as easy
as moving or installing additional Wireless AP/Bridges – no wires!
System Requirements
Before you install the Wireless USB Adapter, check your system meets the following
requirements:
• An available USB port.
• Windows 98/Me/2000/XP (have the Windows installation CD-ROM ready for use
during driver installation.)
• A minimum of 1 MB of free disk space for installing the driver and utility program.
Another IEEE 802.11b compliant device installed in your network, such as a
Wireless Access Point, or another PC with a wireless adapter.
Package Checklist
The Wireless USB Adapter package includes:
• 1 Wireless USB Adapter with internal dual dipole antennas (WN3501C)
• 1 Driver diskette
• 1 Utility diskette
• 1 USB cable
• 1 Fastening clip
• 3 Peices of Velcro
• 2 Magnets
• This User Guide
Please complete the warranty registration card and return to Accton, or register
online at: register.acctontech.com.
1
Advertisement
Table of Contents
