Download Print this page

Advertisement

Quick Links

Thank you for purchasing SAITO product. This unit is the completed set of the steam plant.
It includes Burner (Burning tray), Boiler, Oiler, Steam engine, and Drain tank that are all needed to be a power plant in a
plate. You can enjoy handling the steam power plant easily with only water, fuel and some stuffs for safety.
NOTES for safety
・In operation for this product, you use fire and fuel. Take special care for burn injury or fire accident.
・DO NOT allow a child to operate it alone, make sure to do with an adult. And keep staying while fuel is burning.
・Make sure that there re no stuff burnable and equip a wet towel or a bucket of water for safety.
・Make sure to fill up proper amount of water and fuel. DO NOT feed too much fuel to prevent boil-dry burning that
breaks boiler.
・Check if the silicon tubes are surely connected to each nipple and pipe. If you operate even there are any loosening, it
may blow off suddenly due to high pressure.
・DO NOT put your face or eyes close to the engine and boiler while the engine is running. The flywheel splatters
steam/hot water and oil content. And NEVER look into the smokestack during fuel burning.
・Since there a bit of toxic gas produced by the incomplete combustion of methanol, make sure to ventilate sufficiently,
and DO NOT breathe the gas directory.
・During running or just after that, whole devices are very hot. DO NOT touch by your hands to each device.
・Please note that we cannot be responsible for any accident, injury, or trouble in the use of this product.
CONTENT
・UNIT(Assy; Boiler, Burner (Burning tray), Engine,
  Oiler, Drain tank, Pressure gauge)
・O-rings (For Spare)
 ・For Drain tank cap / Overflow plug
 ・For Safe valve
 ・For Oiler cap
・Smokestack and fixation screw
・Steam oil(Blue)
・Machine oil(Brown)
・Measuring cup
・Dropper for fuel feed
・Infundibulum for water supply
・Instruction manual
NEEDED BESIDES THE CONTENT
・Fuel alcohol
・Screw driver +(for smokestack fixation)
・Wet towel(for safe)
SPECIFICATIONS
Engine OE-1
気筒数
単動型単気筒
Cylinder
Single acting single cylinder
気筒容積
0.6cc
Displacement
ボア
8Φmm
Bore
ストローク
12mm
Stroke
バルブ形式
オシレーチング・バルブ
Valve type
Oscillating valve
Boiler OB-1
給水容量
100cc
Tank Capacity
燃料容量
20ccMAX
Fuel Capacity
燃焼時間
Approx.15min
Burning Duration
安全弁作動圧
約1.2気圧(≒1.2bar)
Safe valve WP
Dimension
全長
210mm
Length
全幅
80mm
Width
全高
120mm
Height
190mm
(w/Smokestack)
乾燥重量
Approx.700g
Dry Weight
OE-1&OB-1UNIT
INSTRUCTION MANUAL
CONTENT
x2
x1
x1
x1
x1
x1
x1
x1
x1
x1
PART NAMES
Pressure gauge
Safe valve
Overflow plug
Engine/ OE-1
Starting Knob
-1-
Oiler
Drain tank
Smokestack
Boiler /OB-1
Burner / Burning tray

Advertisement

loading

Summary of Contents for Saito OB-1

  • Page 1 INSTRUCTION MANUAL Thank you for purchasing SAITO product. This unit is the completed set of the steam plant. It includes Burner (Burning tray), Boiler, Oiler, Steam engine, and Drain tank that are all needed to be a power plant in a plate.
  • Page 2 Preparation (Some pictures show V-2&OB-1 Unit , but operation is just the same) A. Fixing the smokestack B. Preparation (Filling up water) 1. Fix the smokestack to the boiler with a fixation 2. Remove the safe valve cap. screw. Once fixed, it doesn t need to be removed.
  • Page 3 8. Feed machine oil (brown liquid) to the thin hole on the 9. Feed the oil to the thin hole and crank pin as the pillow block. picture shows. It may splatter the oil with too much feeding. D. Feeding Fuel 10.
  • Page 4 When you carry the unit, handle the base plate securely with both hands not handle the boiler, engine, pressure gauge or pipes. ・When you need the consumables such as steam oil, machine oil, and O-rings, ask the shop that treats SAITO products in your country.

This manual is also suitable for:

Oe-1