Troubleshooting - VTech Put & Take Dumper Truck User Manual

Table of Contents

Advertisement

TROUBLESHOOTING

If for some reason the program/activity stops working or malfunctions,
please follow these steps:
1. Please turn the unit OFF.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the batteries.
4. Turn the unit ON. The unit should now be ready to play again.
5. If the product still does not work, replace with an entire set of new
batteries.
If the problem persists, please call our Consumer Services Department
at 01235 546810 (from UK) or +44 1235 546 810 (outside UK), and a
service representative will be happy to help you.
IMPORTANT NOTE:
Creating and developing VTech products is accompanied by a
responsibility that we at VTech
effort to ensure the accuracy of the information, which forms the
value of our products. However, errors sometimes can occur. It is
important for you to know that we stand behind our products and
encourage you to call our Consumer Services Department on at
01235 546810 (from UK) or +44 1235 546 810 (outside UK), with
any problems and/or suggestions that you might have. A service
representative will be happy to help you.
®
take very seriously. We make every
10

Advertisement

Table of Contents
loading

Table of Contents