Toyota COROLLA 2018 Quick Reference Manual page 26

TOYOTA SAFETY SENSE
PEDESTRIAN DETECTION FUNCTION
In certain conditions, the PCS system included with the TSS-P package may also
help to detect a pedestrian in front of your vehicle. With Toyota Safety Sense™ P,
PCS uses an in-vehicle camera and front-grill mounted millimeter-wave radar to
help detect a pedestrian in front of your vehicle in certain conditions. The in-vehicle
camera of PCS detects a potential pedestrian based on size, profile, and motion of
the detected pedestrian. However, a pedestrian may not be detected depending
on the conditions, including the surrounding brightness and the motion, posture,
size, and angle of the potential detected pedestrian, preventing the system from
operating or engaging. Refer to a Toyota Owner's Manual for additional information.
As part of the Pre-Collision System, this function is also designed to first provide an
alert and then automatic braking if needed.
CHANGING THE PCS ALERT TIMING
Using the steering wheel controls & monochrome MID
(1) Press the "DISP" switch to find
(2) Press the "DISP" switch to find
screen is displayed.
(3) Press and hold the "DISP" switch to select
timing changes timing changes as shown above.
Using the steering wheel controls & color MID
(1) Press " " switches and select
(2) Press " or
and then press "
(3) Select "Sensitivity" and then press "
response to the PCS alert timing changes as shown above. You can press "
go back to the menu.
Note: PCS is enabled each time the engine switch is turned to Ignition On. The
system can be disabled/enabled and the alert timing of the system can be changed.
(Alert timing only, brake operation remains the same).
Monocular camera sensor
" switches and select the
". The setting screen is displayed.
™
Middle
Far
(default)
, then press and hold to select.
, then press and hold to select. The setting
. The response to the PCS alert
from the MID.
setting function from the MID
." Each time "
24
Millimeter
wave radar
Near
" is pressed, the
" to