Download Print this page

Powering Modes; Battery Tips - FIBARO SMOKE SENSOR Installation And Operation Manual

Hide thumbs Also See for SMOKE SENSOR:

Table of Contents

Available languages

I n st all at io n and O p era t io n Gu i de

02. POWERING MODES

There are two powering modes for the Smoke Sensor. By default it is powered

by a factory-included battery. Alternatively it can operate with a constant current,

after connecting a 12/24 VDC power source to the +12/24 and GND terminals

(see figure 01). When powered by a battery, the Smoke Sensor communicates

with the Active SmartHome Gateway periodically, although smoke detection is

sent immediately. Some of the configuration parameters, including a low battery

warning, are sent periodically at specified start-up intervals, or at a manual start-

up (press the B-button three times, see fig. 01).

F ig u r e 0 1

B - b u t t o n

S mo k e S e n s o r

P a g e | 5

Table of Contents

Table of Contents

Do you have a question about the SMOKE SENSOR and is the answer not in the manual?