FIBARO SMOKE SENSOR Installation And Operation Manual page 4

I n st all at io n an d O p er at io n Gu i d e
The LED indicator warns of a fire in operating mode, and is used to check
whether the device is within the range of the Z-Wave network. The smoke
sensor is designed to operate in confined spaces, under normal conditions (free
from dust or condensed water vapor).
The Smoke Sensor is a universal, optical Z-Wave smoke detector. The device
can be hard-wired (12 or 24 VDC) or battery operated. Smoke detection is
signaled through a sound alarm and a flashing LED. Additionally, the smoke
sensor signal can be sent wirelessly to the Active SmartHome Gateway.
S mo k e S e n s o r P a g e | 4