Table of Contents
Advertisement
Quick Links
Hydraulic
Wheel Dolly
Operating Instructions & Parts Manual
Model Number
HW93766
!
This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
Obey all safety messages that follow this symbol to avoid possible injury or death.
Read this manual and follow all the Safety Rules and Operating Instructions before using this product
HW93766-M0_102011
Capacity
3/4 Ton
10939 N. Pomona Ave. Kansas City, MO 64153
customerservices@heinwerner-automotive.com
Made in the
U.S.A.
SFA Companies
Advertisement
Table of Contents
Related Manuals for HEIN-WERNER AUTOMOTIVE HW93766
Summary of Contents for HEIN-WERNER AUTOMOTIVE HW93766
- Page 1 Hydraulic Wheel Dolly Operating Instructions & Parts Manual Model Number Capacity HW93766 3/4 Ton Made in the U.S.A. This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.
-
Page 2: Safety And General Information
SAFETY AND GENERAL INFORMATION Save these instructions. For your safety, read, understand, and follow the information provided with and on this wheel dolly before using. The owner and/or operator of this equipment shall have an understanding of this equipment and safe operating procedures before attempting to use. -
Page 3: Specifications
Lifting Arm Overall Size Model Capacity Lift Range Length Spread (l x w x h) HW93766 3/4 ton 4" - 9" 23" 26-1/2" 38-3/4" x 39-1/2" x 32" ASSEMBLY 1. Insert base legs into lower main frame and secure with two 1/2-13 x 1 hex bolts. -
Page 4: Operation
PREPARATION (cont.) 4. To familiarize yourself with basic operation, position hydraulic unit upright as shown in Fig. 2., locate and engage release valve with slotted portion of provided handle, then turn release valve: a. Clockwise until firm resistance is felt to further turning. This is the ‘CLOSED’ release valve position used to raise the load. -
Page 5: Maintenance
LOWERING 1. Engage and slowly turn the release valve counterclockwise, but never more than 1 full turn. TRANSPORTING LOADED WHEEL DOLLY 1. Ensure that wheel assembly is secured to the wheel dolly by means of the provided chain. 2. When wheel assembly has cleared the hub or the axle, lower the lift arms to the lowest position that will still allow movement. -
Page 6: Troubleshooting
When ordering parts, give Model number, parts number and parts description. Call or write for current pricing: Hein-Werner Customer Support, 10939 N. Pomona Ave. Kansas City, MO 64153 E-mail: customerservices@heinwerner-automotive.com Phone:(816) 891-6390 Figure 4 - Parts Illustration for Wheel Dolly HW93766 - Hydraulic Unit Item Part Number Description... - Page 7 Tilt Handle Assembly 766-000-002 Restraint Chain 766-000-003 Tilt Arm Roller Assembly 766-000-004 Lifting Arm Roller Assembly 766-000-005 Front Wheel Assembly HW93766-L0 Labels (not shown) HW93766-M0 Owners Manual (not shown) Figure 5 - Parts Illustration for Wheel Dolly HW93766 - Main Frame...
-
Page 8: Two Year Limited Warranty
TWO YEAR LIMITED WARRANTY For a period of two (2) years from date of purchase, SFA Companies will repair or replace, at its option, without charge, any of its products which fails due to a defect in material or workmanship under normal usage. This limited warranty is a consumer’s exclusive remedy.