Advertisement
Quick Links
Installation guide
Pressure switch
RT 1AE, RT 6AEW, RT 6AEB, RT 6AES, RT 116E, RT 5E, RT 117E,
RT 112E, RT 113E, RT 260AE, RT 262AE
Refrigerants:
R 717
, HCFC, HFC and HC
1)
Only types with letter A are suitable for R 717
1)
Fig. 1
Fig. 4
Fig. 6
© Danfoss | DCS (jmn) | 2015.11
List of applicable standards:
for ATEX: EN 60079-0:2012+A11:2013; EN 60079-11:2012
for IECEx: IEC 60079-0:2011; IEC 60070-11:2011
Fig. 2
RT 113E
[bar]
A
A: Range setting
B: Differential obtained
C: Differential setting
Fig. 7
RT 1AE
RT 5E
RT 112E
RT 113E
RT 116E
RT 117E
Fig. 5
[bar]
Fig. 8
C
B
Fig. 9
Fig. 3
DKRCC.PI.CB0.B8.02 | 520H10532 | 1
Advertisement
Related Manuals for Danfoss RT 1AE
Summary of Contents for Danfoss RT 1AE
-
Page 1: Installation Guide
Installation guide Pressure switch RT 1AE, RT 6AEW, RT 6AEB, RT 6AES, RT 116E, RT 5E, RT 117E, RT 112E, RT 113E, RT 260AE, RT 262AE Refrigerants: List of applicable standards: for ATEX: EN 60079-0:2012+A11:2013; EN 60079-11:2012 R 717 , HCFC, HFC and HC for IECEx: IEC 60079-0:2011;... -
Page 2: Safety Requirements
Adjustment or the use of them against the instructions of Danfoss. RT 1AE, RT 116E, RT 5E, RT 117E, RT 112E, RT 113E 7. Any overload of the RT switch must be prevented. Overloaded or (see fig. 1, fig. 2 and fig. 8) damaged apparatus must be exchanged.
Need help?
Do you have a question about the RT 1AE and is the answer not in the manual?
Questions and answers