Mode Setting - Pelonis HF-1003 Owner's Manual

18. Don't leave the heater on unattended.
19. To prevent a possible fire, do not block air intakes or exhaust in any manner. Do
not use on soft surfaces, like a bed, where openings may become blocked.
SAVE THESE INSTRUCTIONS.
OPERATION INSTRUCTION
Before using the heater, make sure that it is on a flat and stable surface. Damage
•
may occur if it is placed in an incline or decline.
Avoid overloading your circuit by not using other high wattage appliances in the
•
same outlet. At 1500 Watts, this units draws 12.5Amps

MODE SETTING

To start heater operation, turn Thermostat Control clockwise to the highest
•
setting.
in the
Thermostat Control
Power and Setting Control
C
Power Indicator Light
A
B
C
2