GC-150 Operation Manual 1. DESCRIPTION GC-150 gamepad can be used in different games such as simulators, arcades, shooter games etc. The ergonomic design of the GC-150 manipulator increases the accuracy of control during the game. 2. SAFETY PRECAUTIONS • Do not disassemble or repair the device on your own. Maintenance and repairs should be carried out by qualified service centre staff...
Page 4
PC Gamepad 6. DESCRIPTION OF CONSTRUCTION a D-Pad b Additional buttons “Turbo”, “Clear” and “Auto” c Buttons 1-4 d Buttons “Select” and “Start” e Buttons “R1” and “R2” f USB cable g Buttons “L1” and “L2” CLEAR TURBO AUTO SELECT START Fig.
GC-150 Operation Manual 7. CONNECTION AND INSTALLATION • Connect th e manipulator with a USB cable to an available USB port f on th e computer. • No additional software is required for operation. • In order to test and configure the gamepad, choose «...
Page 6
PC Gamepad 8.TROUBLESHOOTING Solution Problem After connection, the game А. Check whether the cable of the controller is strongly controller does not work connected to the USB port. normally. B. Open the Properties: USB Gamepad, and check that the gamepad is connected correctly. C.
Page 7
PC Gamepad Manufacturer: SVEN PTE. LTD, 176 Joo Chiat Road, № 02-02, Singapore, 427447. Produced under the control of Oy Sven Scandinavia Ltd. 15, Kotolah- dentie, Kotka, Finland, 48310. Made in China. ® Registered Trademark GC-150 of Oy SVEN Scandinavia Ltd. Finland.
Need help?
Do you have a question about the GC-150 and is the answer not in the manual?
Questions and answers