Troubleshooting; Product Registration - Sony NSZ-GS7 Quick Setup Manual

Troubleshooting

The player does not work, or you want to reboot the player.
Press (Control), (Shift) and (Backspace) at the same time on the keyboard of the
remote to reboot the player. If the player still does not work, disconnect the AC power cord
from the player and reconnect it. This does not initialize the player settings or other such
settings.
There is no picture (screen is dark).
– Make sure that the AC power cord is securely connected.
– Make sure that all the connecting cables are securely connected. (Especially, make sure
HDMI IN and OUT are correctly connected.)
– Change the input of the TV to display the signal from this player.
– Make sure that the power indicator is lit up white as illustrated below.
Power indicator
– Connect a Set Top Box or a Digital Video Recorder to the HDMI IN jack. (When you press TV,
GUIDE, or DVR on the remote, the image from the device connected to the HDMI IN jack will
appear on the TV screen.)
Press (HOME) on the remote, and then select any application other than Live TV to
return to the player screen.
– Try the following:
– Turn the player off and on again.
– Turn the connected device off and on again.
– Disconnect and reconnect the HDMI cable.
– Disconnect the AC power cord from the player and reconnect it after about two minutes.
– The HDMI OUT jack is connected to a DVI device that does not support copyright protection
technology.
The player cannot connect to the Internet.
– Make sure that the LAN router or Wireless LAN router is on.
– Make sure that the LAN cable is connected correctly when using a wired network
connection.
– Check the settings of the LAN router or Wireless LAN router. For details, refer to the
operating instructions supplied with the LAN router or Wireless LAN router.
– Move the player and the Wireless LAN router closer to each other. The Wireless LAN
connection is affected by the surrounding environment (the wall material, radio wave
receiving condition, obstacles between the player and the Wireless LAN router, etc.).
– Move the player away from devices that use a 2.4 GHz frequency band (microwaves,
Bluetooth devices, cordless digital devices, etc.), or turn off such devices. These devices
may interrupt the communication between the player and the Wireless LAN router.
– If you cannot get Wi-Fi over the Internet, please make sure you do not have a LAN cable
connected. The player places priority on a LAN connection over a Wi-Fi connection.
I cannot find the model number of my Set Top Box or TV in the Initial
Setup Wizard.
– Select a different model number and check that the corresponding device works.

Product Registration

Please take a few minutes to register your product. This also allows
us to contact you with important product notifications, or provides a
record in case of product loss or theft.
From your player
Press (HOME) and select [All Apps] - [Product Registration]
From your PC
For customers in the USA:
http://productregistration.sony.com/
For customers in Canada:
http://www.sony.ca/register/
The picture from the Set Top Box is not output correctly (via an AV
Receiver).
– Make sure that HDMI cables are connected securely to the Set Top Box and to the player.
– Turn the Set Top Box off, then turn it on again.
– If the picture is still not output correctly, reconnect the TV directly to the player, and connect
AV Receiver and the player with an optical digital cable as illustrated below.
Network Media Player
HDMI cable*
Optical digital cable*
TV AV Receiver
* Not supplied
– When this player and the TV are connected with HDMI cables via an AV Receiver, pictures
may not be displayed properly due to the copyright protection feature of some Set Top
Boxes. In this case, contact your Cable/Satellite TV Operators.
The remote does not function.
– Disconnect and reconnect the AC power cord. If the remote still does not function, re-pair
the remote with the player by following the procedure below.
 Press shortly the CONNECT button, located on the bottom of the player, with a thin, sharp
object such as the point of a pen, etc.
 Follow the instructions on the screen.
The LED on the remote is flashing.
– The remote is being paired. Perform pairing according to the instructions on the screen.
– The LED on the remote continues to flash after pairing is complete because the remote is
connecting with the player. This is not a malfunction. The LED on the remote flashes faster
when it starts connecting with the player.
To launch the online "Help Guide"
The Help Guide gives you detailed information on how to use the
player.
From your player
Press (HOME) and select [All Apps] - [Help Guide]
From your PC or smartphone
You can also access the Help Guide from a PC or smartphone.
http://www.sony.net/helpguide/r/networkplayer/
HDMI cable*
Set Top Box
Use a thin, sharp object such as the point of a
pen to press the CONNECT button.