Graco 24Z978 Instructions Manual page 2

Pulse HUB Overview and Component ID
Pulse HUB Overview and Component ID
The Pulse HUB is a self-contained computer with the Pulse Fluid Management Software
preloaded. It also is the Personal Area Network (PAN) host used for RF communication with
other Pulse system components (meters, Pump Air Control [PAC's], Tank Level Monitors
[TLM's]). Access to the Pulse Fluid Management system is accomplished by http protocol (web
browser on the Local Area Network [LAN]).
F
C
B
F . 1
IG
Item
A Power Inlet Port
B USB Port
C
Connection
D Power Light
E Micro SD Slot
F
G Pulse Fluid
Management
Software Status
2
A
E
Name
Plug end of power adapter into power inlet port (A). The other
end of the power adapter is plugged into 120-240 VAC electrical
outlet.
USB connection port.
Supplies connection to the LAN.
Ethernet
Steady, green light. When lit, indicates the unit is receiving
power.
Micro SD card access
External antenna for RF signal transmission
Antenna
Green, Red, and Orange LED indicated status of the Pulse Fluid
Management Software. See HUB Status Light, page 5.
Light
G
ti32390
Description
F
D
3A5414A