Advertisement
INSTALLATION AND OPERATION MANUAL
20 Ton Heavy Duty
Hydraulic Shop Press
Model:
RP-20HD
VER B
SHIPPING DAMAGE CLAIMS
When this equipment is shipped, title passes
to the purchaser upon receipt from the carrier.
Consequently, claims for the material damaged in
shipment must be made by the purchaser against the
transportation company at the time shipment is received.
PLEASE READ THE ENTIRE CONTENTS OF THIS MANUAL PRIOR TO
INSTALLATION AND OPERATION. BY PROCEEDING YOU AGREE THAT
YOU FULLY UNDERSTAND AND COMPREHEND THE FULL CONTENTS OF
THIS MANUAL. FORWARD THIS MANUAL TO ALL OPERATORS. FAILURE TO
OPERATE THIS EQUIPMENT AS DIRECTED MAY CAUSE INJURY OR DEATH.
BE SAFE
Ranger™ Shop Presses are designed and built
with safety in mind. However, proper training and
thoughtful operation on the part of the operator can
increase your overall safety. DO NOT operate or
repair this equipment without reading this manual
and the important safety instructions shown inside.
REV A 05-22-09
1645 Lemonwood Dr.
Santa Paula, CA. 93060, USA
Tel: 1-805-933-9970
Toll Free: 1-800-253-2363
Fax: 1-805-933-9160
www.rangerproducts.com
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Ranger RP-20HD
Summary of Contents for Ranger RP-20HD
- Page 1 SHIPPING DAMAGE CLAIMS BE SAFE When this equipment is shipped, title passes Ranger™ Shop Presses are designed and built to the purchaser upon receipt from the carrier. with safety in mind. However, proper training and Consequently, claims for the material damaged in...
-
Page 2: Warranty Policy
For Parts Or Service Contact: Defective parts replaced at no charge must be returned BendPak Inc. / Ranger Products to your dealer or Ranger Products™ within 60 days of the 1645 Lemonwood Dr. date that the replacement parts are shipped; otherwise, you must pay for the replacement parts at the current Santa Paula, CA. -
Page 3: Owner/Operator Responsibility
THIS OPERATING MANUAL CONTAINS IMPORTANT DETAILS CONCERNING THE ALTERATIONS SAFE OPERATION OF THIS EQUIPMENT. Because of potential hazards associated with this type of THE USER MUST READ AND UNDERSTAND equipment, no alterations shall be made to the product. THESE DETAILS BEFORE ANY USE OF THE EQUIPMENT. -
Page 4: Maintenance
ASSEMBLY INSTRUCTIONS 6. Place the Press Plates (8) on the Table if desired. RP-20HD 7. Your 20 ton shop press, model RP-20HD is now ready for operation. Refer to the Parts Breakdown on Page 5. 1. Attach legs (2) to the bottom of the Posts (6) -
Page 5: Specifications
OVERALL OVERALL Base Adjustable Table CYLINDER SHIPPING HEIGHT WIDTH Dimension Height STROKE WEIGHT RP-20HD 40,000 Lbs 63 1/4" 37" 27.5” x 26” 7.5” - 36.25’ 5 1/2" 255 Lbs 18,144 Kg 1,530 mm 940 mm 692mm x 660mm 190mm x 921mm... - Page 6 For Parts Or Service Contact: BendPak Inc. / Ranger Products 1645 Lemonwood Dr. Santa Paula, CA. 93060 Tel: 1-805-933-9970 Toll Free: 1-800-253-2363 Fax: 1-805-933-9160 www.bendpak.com www.rangerproducts.com...
Need help?
Do you have a question about the RP-20HD and is the answer not in the manual?
Questions and answers