Restore Factory Settings; Specification; Tips; Legal - KOOGEEK DW1 Quick Start Manual

Restore Factory Settings
Insert the metal pin into the pinhole and hold for 10 seconds. When the LED flashes green once, it
indicates that you have restored the device to factory settings.
Specification
Power supply: 3 V button cell
Battery type: Lithium battery CR2450
Wireless connection: Bluetooth Low Energy
Operating temperature: ‐20℃ ~ 60℃
Color: White
Magnet dimensions: 46 * 33 * 17.1 mm / 1.8 * 1.3 * 0.67 in (L×W×H)
Sensor dimensions: 26 * 12 * 9.2 mm / 1.1 * 0.4 * 0.3 in (L×W×H)
Tips:
1. Mount the sensor on the door / window frame and the magnet on the door / window. If the
sensor is used on double doors, mount the sensor on the least‐used door and magnet on the
most‐used door.
2. Avoid mounting sensor in areas where they will be exposed to moisture.
3. Avoid mounting sensor in areas with a large quantity of metal or electrical wires.
4. Do not clean with liquid.
5. The product has a 1‐year limited warranty.
Legal
Use of Works with Apple HomeKit logo means.....
Controlling this HomeKit‐enabled accessory......
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
NOTE 1: Any changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.