Installation - Current Lightsweep Installation Manual

Digital controller
Table of Contents

Advertisement

Installation

Important! Must be installed in a Cabinet.
1
2
3
Short press P1/P2 to start testing DIGITAL A/B Bus: lamps
Short press P1/P2 to start testing DIGITAL A/B
start dimming up and down on the bus until another
Bus: lamps start dimming up and down on the
short press is performed or 5-minute timer is expired.
bus until another short press is performed or
Short press P1/P2 to start testing DIGITAL A/B
Meanwhile 'DIGITAL A/B' LED is blinking purple
Bus: lamps start dimming up and down on the
5-minute timer is expired. Meanwhile 'DIGITAL
Short press P1/P2 to start testing DIGITAL A/B
A/B' LED is blinking purple
bus until another short press is performed or
Bus: lamps start dimming up and down on the
5-minute timer is expired. Meanwhile 'DIGITAL
bus until another short press is performed or
A/B' LED is blinking purple
5-minute timer is expired. Meanwhile 'DIGITAL
A/B' LED is blinking purple
Strip wires as shown
on illustration.
Strip wires as shown
on illustration.
Strip wires as shown
on illustration.
Mains
110-240VAC ~50/60Hz
Mains
110-240VAC ~50/60Hz
Mains
110-240VAC ~50/60Hz

Advertisement

Table of Contents
loading

Table of Contents