Technical Data; Product Certifications; System Components; Key Functions - Current Lightsweep Installation Manual

Technical Data

Key Functions

Type: Lightsweep™ Digital Controller
Product Code: LL-DC
93037756
SKU:
Dimensions: W x L x H: 213 x 90 x 58 mm
Weight: 400 grams
Housing: DIN (EN50022) rail mounted, M12
Warranty: 5 years
Powering Device
Power Input:
Fuse Protection - Internal: 1A load, T/SLO-BLO, VDE/UL rated
Electrical Safety Class:
Terminals:
Terminal Assignment:
* In case of 277V usage step down transformer needed. Please find the compatible
type in table below. Usage of other step down transformer is possible. Please contact
your local support for more information.
Compatible Step Down Transformer
MANUFACTURER TyPE
Hatch Lighting LS120-75EN-277
Product Availability
SKU DESCRIPTION
93037756 LightSweep™ Digital Controller

System Components

Mobile
device
LAN
Lightsweep Digital
TM
Lightsweep
network
Interface
Lightsweep TM
Digital
Multisensor
Luminaires
110 - 240 V AC 50/60Hz *
EU Safety Class II if installed in
an appropriate mounting box
Screw terminals
Wire size: 30-12 AWG (0.05-3 mm
(solid or stranded wire with sleeve)
See wiring diagrams and
information printed on unit. If
incorrectly connected there is a risk
of failure, malfunction or destruction.
ARTICLE
NO.
LL-DC
Lightsweep
TM
Digital
local network
LAN
Lightsweep Digital
TM
Lightsweep
TM TM
network
Digital Digital
Switch Switch
Interface
Luminaires

Operating Conditions

Operating Temperature: 0°C - 45°C
Relative Humidity:
IP Rating:
Interfaces
Digital Interface:
Relay Outputs:
)
2
Input Interface:
Data Interface:
Data Cable Routes: CAT5 and higher grade, max. 100
Controller Network: Up to 10 Lightsweep Digital Controller
Product
Certifications
Lightsweep Digital system components:
™
SKU DESCRIPTION
93037756 Lightsweep Digital Controller
™
93045357 Lightsweep Digital Multisensor Recessed
™
93037758 Lightsweep ™ Digital Multisensor Surface Mounted
93037759 Lightsweep Digital Switch Interface for up to 3 buttons
™
93037760 Lightsweep Digital Switch Interface for up to 9 buttons
™
Lightsweep TM
Digital
Multisensor
90%, non-condensing
20
Two independent digital
communication and power supply
interface. The power supply is
feeding 18,5V/175mA DC, +/-10%,
it has electrical current limitation
and protection against overheating
and overvoltage. DALI 2.0 devices
can be connected, please contact
your local support for compatible
device's list.
4 outputs as Solid state dry contacts,
24-240V AC or DC nominal load,
400V/50mA peak, galvanically
separated contacts
(VISO= max. 4.5 kV between contacts)
4-channel Max. 25VDC
1 Ethernet connector: RJ45, 10Mbit/s
full duplex
meter cable length
can form a network
E486320
ARTICLE NO.
LL-DC
LL-DMS2-CR
LL-DMS2-CS
LL-DSW-PB3
LL-DSW-PB9