Table of Contents
Advertisement
DrillTrack G2 Operating Instructions
Locating
Locate the Drillhead/DataSonde housing by moving the Receiver in the direction indicated by the four
arrows on the LCD. When all four arrows appear on the screen, you are directly above the
Drillhead/DataSonde housing and the depth will be displayed automatically.
To toggle between the "Two Arrows Steering" screen and the "Four Arrows Locate" screen, press the
Manual key.
Moving forward, away from the Drillhead/DataSonde housing, the screen will automatically change from
the "Four Arrows Locate" to the "Two Arrows Steering" screen.
When behind the Drillhead/DataSonde housing and moving forward towards the Drillhead/DataSonde
housing, the screen will automatically change from the "Two Arrows Steering" screen to the "Four
Arrows Locate" screen.
5-9
Advertisement
Table of Contents
