softDSP SDS 200 SoftScope User Manual page 5

SAFETY SUMMARY
Do not install substitute parts or perform any unauthorized modification to the product. Return
the product to a softDSP Sales and Service Office for service and repair to ensure that safety
features are maintained.
Observe Maximum Working Voltage
Do not use this product on bare wires above 42Vpk, AC 30Vrms and DC 60V.
Product Damage Precautions
Do not open the cover and attempt any repairs. An electric shock or accident may be caused by
opening the cover or improper handling. If you suspect there is damage to this product, you
must have it inspected by qualified service personnel.
Do not drop the product. This product contains fragile components that can be damaged by high
impact. Take care to prevent the product from dropping on the floor or other hard surfaces.
To avoid electric shock, do not operate this product in wet or damp conditions.
Do not operate near flammable materials.
4