TriStar Power AirFryer Pro CM002 Owner's Manual page 7

Air fryer, rotisserie, dehydrator
Table of Contents

Advertisement

Parts & Accessories
Important
Please make sure that your Power AirFryer Pro
has been shipped with the components
that you ordered (some accessories may be sold
separately). Check everything carefully before use.
If any part is missing or damaged, do not use
this product. Contact Customer Service using the
number located in the back of the owner's manual.
5. Air Flow Racks
Can be used for dehydration and to cook crispy
snacks or reheat items like pizza.
6. Rotating Mesh Basket
Great for fries, roasted nuts, and other snacks.
Use Rotisserie Fetch Tool to place the Basket
into and remove the Basket from Unit.
7. Drip Tray
Cook with the Drip Tray in place for easy
clean-up. Always use the Drip Tray when
cooking.
8a. Skewers (Optional)
Great for all your kabob recipes, meat, fish
or veggies.
8b. Adjustable Skewer Racks (Optional)
Used when making kabobs. Skewer Racks fit
over Shaft and lock in place with Set Screws.
9. Rotisserie Shaft, Forks & Set Screws
Use for roasts and whole chicken. Slide the
Shaft lengthwise through the center of the meat.
Unit Specifications
Model Number
Supply Power
CM002
AC 120V 60Hz
Rated Power
Capacity
1,019 cubic in.
1700W
(0.59 cu. ft.)
Slide the Forks onto the Shaft from each end
and then into the meat. Lock in place with the
Set Screws. There are indentations on the Shaft
for the Set Screws. You can adjust the Screws
closer to the center of the Shaft if needed but
never beyond the indentation. NOTE: Ensure
that the roast or chicken rotates freely within the
oven. If the item being cooked is too large, it will
not rotate or cook evenly (3.5–4 lb on average).
Wrap the meat with kitchen string to help with
even rotation.
10. Rotisserie Fetch Tool
The Rotisserie Fetch Tool should be used
to insert and remove any foods prepared using
the Rotisserie Shaft or Skewers. Place under the
Rotisserie Shaft and lift (left side first) and then
gently extract the food.
11. Rotisserie Stand (Optional)
The Rotisserie Stand can be used to hold
the Rotisserie Shaft with food in an upright
position. To avoid burns, use hand protection
when removing hot food and carefully set the
Rotisserie Shaft in the Rotisserie Stand.
Warning
Forks, Skewers, and other metal parts with this Unit
are sharp and will get extremely hot during use.
Great care should be taken to avoid personal injury.
Wear protective oven mitts or gloves.
Temperature
150° F–400° F (65° C–200° C)
Display
LED Touch Screen
Power AirFryer Pro™ | Model: CM002
7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents