Advertisement
TWS Pairing
2s
On OFF state, press MFB of headset (R) or headset (L) for 2
seconds to power on and waiting for about 10 seconds , the two
headsets will enter auto-pairing mode. The two headsets connect
with each other after few seconds, the headset (R) alternately
flashing red and blue, and then open the phone's bluetooth device
to search "BS186FP".
Pick up the two headsets
from the charging base to
power on and waiting for 10
seconds , the two headsets will
enter auto-pairing mode. The
two headsets connect
with each other after few seconds, the headset (R) alternately
flashing red and blue, and then open the phone's bluetooth device
to search.
Do as the above ways: 1 or 2 , after TWS successfully paired: left
headset prompts "left channel" and right headset prompts "right
channel-pairing"
Cell phone begins to search for bluetooth
devices (see the user guide of your phone
for instructions). Mobile phone to search
Bluetooth ON
for "BS186FP" and select the "BS186FP".
BS186FP
Auto Transfering between R & L headset
TWS firstly use the default right headset as the main heaset and left headset
as the vice headset. But when the main headset is turned off, the vice headset
will automatically connect with the mobile phone and can be used individually.
And the turned-off headset will quickly reconnected with the main headset and
work normally after restarting.
TWS Reconnected
Method1:
Press headset (R) and (L) multifunction button at the same time for
2 seconds to power on → wait for several seconds and the two
headsets will automatically connect → wait a few seconds for the
headset to connect with the paired phone → re-connection
successfully.
Method2:
When you pick up the headset from the charging case after 3
seconds to power on→wait for a few seconds, the two headsets will
automatically connect→wait for a few seconds, the headset will be
linked with the paired mobile phone→ re-connection successfully.
Note:
The main headset and vice headset speakers will emit "Connected", (L)
•
prompts "Left Channel", (R) prompts "Right Channel" at the same time, and
the main headset prompts "Second Device connected" after successful
connection with the mobile phone.
•
After the headset has used the switching function, both the left and the right
headset can be used as the main ear, it will not affect the use.
Answering / Ending a Call
接听/挂断电话
•
When incoming call, short press MFB of headset (R) or headset (L),
the speaker prompts once "Du" to answer call; In call mode, long
press MFB of headset (R) or headset (L) for 2 seconds heard
twice"Du" to end a call.
Rejecting a call
Press and hold MFB of headset(R) or headset
(L) for 2 seconds to reject the call, the speaker
prompts twice "Du" and "call reject".
Siri or Google Assistant function
On standby mode or music playing state，
double-click the secondary headset (L) function
key, which can be heard once "Du".
Note:This feature only supports mobile phones
with voice dial-up functions.
Two-call Handling
(Only support the mobile phone which has the function of handling two
phones.)
When you are answering a call, there is another call coming :
1.Long press and hold MFB of headset(R) for 2 seconds to end the current
call and answer incoming call;
2.Short press MFB of headset(R) to hold the current call and answer
incoming call;
3.After the second implementation, short press MFB of headset(R) to switch
between two calls;
4.After the second implementation, long press MFB of headset(R) for 2
seconds to end the current call, and long press MFB of headset(R) for 2
seconds to end the other call.
Note:
All the above operations have to respect the precondition
supported Bluetooth hands free profile V1.5 and Phones are running
holding function (Network services) from telecom.
Music Pause/Playing
On standby mode, shortly press MFB of
headset(R) or headset(L) to play music.
On music playing state, double-click MFB of
headset(R) to PAUSE music. But headset(L) can
not pause music independently.
Adjusting the Volume
In call mode or music mode, shortly press MFB of the headset(R)
to volume up and shortly press the headset(L) to volume down.
Once "Du" can be heard when volumne is up to maximum or
minimum
Forward/Backward
In playing music, long press the (R) multi-function button for 3
seconds till hear the twice "DuDu" and release then next song;
Long press the headset(L) multi-function button for 3 seconds till
hear twice "Du Du". release after the prompt, then last song.
Delete Pairing Records on the Headset
In any state, press and hold the headset multi-function button for
about 10 seconds (off state）→ ON MODE（2 seconds）→
Delete pairing records(10 seconds), until hearing the "Du" voice
for 3 times, and the red/blue light flashes twice at the same time.
Function Instruction of Charging Base
The instruction of charging base indicator light
Four blue indicator lights, each of which represents 25% of the
battery.
Charging base indicator light
On charging mode of charging base,flash blue indicator light.
· One light is always on, which means charging base battery power
fully charged by 25%;
· Two lights mean charging base battery power has been fully
charged by 50%;
· Three lights mean charging battery power fully charged by 75%；
· Four lights mean charging base battery power fully charged by
100%.
Charging base battery display
When no charging but opening the charging base, after four indicator
flash in turn (about 1.5 seconds to complete flash), the indicator will
light on for about 5 seconds to show how much battery is left (after 5
seconds, indicator lights all off ).
· One light is always on, which means charging base battery power
fully charged by 25%;
· Two lights mean charging base battery power fully charged by
50% ;
· Three lights mean charging base battery power fully charged by 75%;
· Four lights mean charging base battery power fully charged by
100%.
The instructions of headset charging power
switch
1. When switch button is pressed,headsets charging position 5V
probe is normal output and headsets can be charged normally.
When switch button is bounced,headsets charging position 5V
probe output off，headsets can not be charged and will automati-
cally on. Please off headsets manually at this time. After headsets
are off, they can be stored in charging base,which will not
consume battery power of charging base.
2. If switch button is pressed and no use for a long time,headsets
will run out of charging base battery power.
When the switch is pressed, is
When the switch is bounce, is a
flush with the surface of the
raised state.
charging base.
Maintenance
•
Do not use abrasive cleaning solvents to clean the headset.
Do
not allow the headset to touch with any sharp objects as this will cause
•
scratching and damage
•
Please keep headset away from high-temperature, humidity and dust.
Common Faults and Exclusion
Faults
Reasons
Solutions
Can not turn on
low battery protection
Charging headsets for 2-3 hours
Can not turn on by picking
Charging both the headsets and
Charging base low battery
up the headset /No indicator
light when headset being
charging base for 2-3 hours
protection
charged
Wrong pairing
Pairing again
No
sounds
after
pairing
The two headsets TWS
Delete pairing records according
pairing failure/TWS paired
Too many pairing records
to user manual
successful but can not find
the headset(R)
Charging base without
Check whether the micro USB
DC power supply doesn't
indicator light when
charging line is plugged or the
output power
charging
power switch is on
1)Checking headset charging interface
Headsets
without
whether has touched to POGO PIN of
The headsets couldn't being
charging base and the location is
indicator light when
charged in charging base
correct or not.
charging
2)Charging for charging base
3) whether the button is pressed state
Turning
off
Low battery
Charging headset for 2-3 hours
automatically
Headset echo
Volume
is
too
loud
or
Adjust the volume at phone or
environment is noisy
change a place
Environmental
interference
Change a place or move to
Noise in call
caused or distance between
close the headset and mobile
headset and mobile is too far
Low voice of the calling
Adjusting wearing position of
Wearing headset is wrong
party
headset
The charging base without
Charging for charging base
The headset no
power, the headset will auto turn
on and paired
charging after put
The headset charging power
Press the headphone charging
back to the charging
switch bounce
power switch
base
Adjusting wearing position of
Wearing headset is wrong
headset
Advertisement
