Off Line And On Line Mode; Changing A Label Roll; Removing The Old Roll; Loading The New Roll - SII 410 User Manual

Off Line and On Line Mode

Pressing and releasing the
line mode. An amber status light indicates that the printer is off line. There is no
communication with the computer when the printer is off line.
This feature is a handy way to stop printing so you don't waste labels while you delete
labels from the print queue.

Changing a Label Roll

This procedure describes how to remove and replace label rolls.
• You can load a different type of label at any time — you don't have to wait until all of the
labels have been used.
• When you run out of labels, the green status light on the front of the SLP flashes. If printing
is in process, a message appears telling you that the printer is out of labels.

Removing the Old Roll

CAUTION: DO NOT pull on the labels to remove them from the
printer. This may cause labels to get stuck inside the printer.
1 Tear off any printed labels. If labels aren't torn off, they may get jammed when you
perform step 2.
2 Press and hold the
does not work, see "Adjusting your Label Position" on Page 12 to release the platen
to remove the labels.

Loading the New Roll

Prepare and load the new label roll as described in "Loading a Roll of Labels" on page 7.
power button toggles the printer between off line and on
form feed button. The labels will reverse out of the SLP. If this
11