Table of Contents
Advertisement
Battery
The battery is located in Aelos' abdomen, and is built in with the robot, so please
do not disassemble.
Main Board
The main board is located in the back of the robot, do not insert any foreign
object into the main board to avoid damaging the robot.
Please use the original adapter when charging the robot! The indicator
will turn red when the robot is being charged, it needs around 1.5h to
fully charge the robot, then the indicator will turn green when charging
ATTENTION
is completed. Then pull the adapter out of the charging port. Pay
attention not to charge the robot over time to avoid damaging the
battery. Then you can play with the robot under full battery condition.
When the battery is less than 20%, the robot will voice prompt "Low
power!" ; when the robot is run out of battery, it will voice prompt "I am
so sleepy, please charge now." . Do not overcharge the robot,
otherwise it will damage the battery.
2
Product Overview
①
②
③
④
⑦
①
Head Touch Area
②
Head LED(WiFi indicator light)
⑤
Speaker
⑥
Switch Button
⑤
⑥
⑧
③
Microphone
④
Chest LED
DC Charge
⑦
⑧
Micro USB(Only support for
Port
data transfer)
3
Advertisement
Table of Contents
Need help?
Do you have a question about the Aelos 1S and is the answer not in the manual?