Advertisement
Available languages
Available languages
Quick Links
Installation and Maintenance Manual
BS85F, BS95F, BS115F, BS140F, BS165F, BS200F, BS225F, BS250F
Thank you for choosing Tsubaki products.
Before installing or working on the product, check label for correct size and make sure you have the
complete set of parts. If any parts are missing, contact your distributor immediately.
This Installation and Maintenance Manual (IMM) should be considered an essential part of the unit
and remain with the unit when redistributed.
Your Cam Clutch is a high quality, well-engineered product which should be handled by experienced personnel only.
For safety purposes, make sure this manual is easily accessible by the user at all times.
To ensure safety and optimal performance, carefully read this instruction manual in its entirety.
Death or serious injury may result from misuse, improper installation and/or improper
maintenance of this product. Please refer to the detailed instructions provided in this
WARNING
manual for installation and maintenance specifications.
1. Guards must be provided on all chain and sprocket installations in
accordance with provisions of ANSI B11.19 - 2010
"Safety Standards for Mechanical Power Transmission Apparatus," and
ASME B20.1 - 2015 "Safety Standards for Conveyors and Related
Equipment," or other applicable safety standards. When revisions of
these standards are published, the updated edition shall apply.
2. Always lock out the power switch before installing, removing, lubricating
or servicing a system which uses PTUC product.
3. When connecting or disconnecting PTUC products, eye protection is required.
Wear safety glasses, protective clothing, gloves and safety shoes.
4. Improper installation or mounting, as well as operating conditions and maintenance,
can affect the performance of a cam clutch. The cam clutch should be inspected regularly.
PTUC is used by Tsubaki to designate Power Transmission Unit Components.
PTUC products include Cam Clutch, DISCO, POWER-LOCK
HF Drive, Shock Damper, Power Cylinder
other like products manufactured by/for Tsubaki.
BS-F Series Cam Clutch
BS270F, BS300F, BS360F, BS425F, BS465F
SAFETY
WARNING
USE CARE TO PREVENT INJURY
COMPLY WITH THE FOLLOWING TO
AVOID SERIOUS PERSONAL INJURY:
TM
Ⓡ
, Shock Relay, Gearmotor,
, Couplings, SCR variable speed motor and
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Tsubaki BS-F Series
Summary of Contents for Tsubaki BS-F Series
- Page 1 4. Improper installation or mounting, as well as operating conditions and maintenance, can affect the performance of a cam clutch. The cam clutch should be inspected regularly. PTUC is used by Tsubaki to designate Power Transmission Unit Components. Ⓡ PTUC products include Cam Clutch, DISCO, POWER-LOCK...
-
Page 2: Installation And Usage
Installation and Usage Recommended shaft tolerance is shown below. Interference fit and shrink fit are prohibited for clutch fixing. Clutch Bore Shaft Fit Guide 1.20 to 2.00 inches dia. Line fit to .0010 inches loose 30mm to 50mm dia. (0.025mm) 2.00 to 3.15 inches dia. -
Page 3: Noise Check
Grease sampling should be taken at regular 12 month intervals depending on environmental and contamination conditions. Additional grease replacement might be needed during sampling if excessive liquid is removed, replace at least 50% more by volume than lost. Recommended Grease Brand BS-F Series Exxon Mobil Beacon 325 Petro-Canada PRECISION Synthetic... - Page 4 Cleaning Wipe off the dust around the plug area on the outer race. Remove two plugs one on the top, another on the side of the Backstop. Rotate the shaft and pour the proper amount of cleaning oil (Kerosene) into Backstop. The quantity of cleaning oil for each model is shown in the table below.
- Page 5 Construction ① ④ ⑦ ⑩ Inner race Thrust bearing Torque arm Labyrinth ring ② ⑤ ⑧ ⑪ Outer race Side plate Socket plug ③ ⑥ ⑨ ⑫ Cam cage Labyrinth plate Oil seal Cotter pin...
-
Page 6: Technical Support And Customer Service
1-1, Kohtari-Kuresumi, Nagaokakyo Kyoto 617- 0833, Japan TSUBAKIMOTO CHAIN CO. Website: http://tsubakimoto.com/tem/ Technical Support and Customer Service: U.S. Tsubaki Power Transmission, LLC Tsubaki of Canada Limited 301 E. Marquardt Drive Wheeling, IL 60090 1630 Drew Road, Mississauga, ON L5S 1J6 Tel : 800-323-7790... - Page 7 U.S. Tsubaki utiliza PTUC para designar "componentes de unidad de transmisión de Ⓡ energía".Los productos PTUC incluyen embrague de leva DISCO, POWER-LOCK , relé de choque, motor de engranaje, accionador HF, amortiguador, Power cylinder , acoples, motor de velocidad variable SCR y otros productos similares fabricados por o para Tsubaki.
- Page 9 Instalación del aireador ・ Para RPM de alta velocidad que superen las siguientes RPM, se recomienda un aireador. ・ BS85F BS95F BS115F BS140F BS165F BS200F BS225F Tamaño Max. RPM de sobremarcha del anillo interior Tamaño BS250F BS270F BS300F BS360F BS425F BS465F Max.
- Page 10 Grasa recomendada Marca Serie BS-F Exxon Mobil Beacon 325 Petro-Canada PRECISION Synthetic Notas: 1. No utilice grasa que contenga aditivos EP. Limpieza Limpie con un paño el polvo que rodea el área del tapón en el anillo exterior. Quite los dos tapones en la parte superior, otro en el lado del freno anti-retorno. Gire el eje y vierta la cantidad adecuada de aceite de limpieza (keroseno) dentro del freno anti-retorno.
- Page 11 Construcción ① ④ Cojinete de empuje ⑦ Brazo de torsión ⑩ Anillo laberinto Anillo interior ② ⑤ Placa lateral ⑧ Pasador ⑪ Conector macho Anillo exterior ③ ⑥ Placa laberinto ⑨ Retén de aceite ⑫ Pasador de chaveta Jaula de leva...
- Page 12 TSUBAKIMOTO CHAIN CO. Sitio web: http://tsubakimoto.com/tem/ Servicio de atención al cliente y soporte técnico: U.S. Tsubaki Power Transmission, LLC Tsubaki of Canada Limited 301 E. Marquardt Drive Wheeling, IL 60090 1630 Drew Road, Mississauga, ON L5S 1J6 Tel.: 800-323-7790 Tel.: 905-676-0400...
- Page 13 4. A instalação ou montagem inadequada, bem como as condições de operação e manutenção, podem afetar o desempenho de uma roda livre. A roda livre deve ser inspecionada regularmente. A sigla PTUC é utilizada pela Tsubaki para designar Componentes da Unidade de Transmissão de Energia.
- Page 14 Instalação e Uso A tolerância do eixo recomendada é mostrada abaixo. O encaixe de interferência e fixação por contração são proibidos para fixação da roda. Orifício da roda Guia de encaixe do eixo 1,20 a 2.00 polegadas dia. Encaixe da linha com espaço de até 0,0010 30 mm a 50 mm dia.
- Page 15 Instalação do Respirador de Ar ・ Para valores de RPM de avanço superiores aos valores de RPM abaixo, um respirador de ar é recomendado. ・ BS85F BS95F BS115F BS140F BS165F BS200F BS225F Tamanho RPM de avanço máx. do anel interno Tamanho BS250F...
- Page 16 50% maior do que o que foi perdido. Graxa recomendada Marca BS-F Series Exxon Mobil Beacon 325 Petro-Canada PRECISION Synthetic Observações: 1. Não use graxas que contenham aditivos de extrema pressão.
- Page 17 Construção ① ④ Rolamento de empuxo ⑦ Braço de torque ⑩ Anel tipo labirinto Anel interno ② ⑤ Placa lateral ⑧ Pino ⑪ Tomada do soquete Anel externo ③ ⑥ Placa do tipo labirinto ⑨ Selante de óleo ⑫ Contrapino Proteção de roda...
- Page 18 1-1, Kohtari-Kuresumi, Nagaokakyo Kyoto 617- 0833, Japão TSUBAKIMOTO CHAIN CO. Website: http://tsubakimoto.com/tem/ Suporte Técnico e Atendimento ao Cliente: U.S. Tsubaki Power Transmission, LLC Tsubaki of Canada Limited 301 E. Marquardt Drive Wheeling, IL 60090 1630 Drew Road, Mississauga, ON L5S 1J6 Tel: 800-323-7790...
Need help?
Do you have a question about the BS-F Series and is the answer not in the manual?
Questions and answers