Toshiba Symbio Manual page 43

"Home", "Sleep", and "Away" icons are displayed by default.
You can register up to three additional, custom modes.
5. Zone view
Displays registered zones and all sensor icons currently connected to Symbio.
Tap a sensor's icon to display its pop-up menu and change its settings.
Swipe left and right to switch the zone.
6. Notification
Displays notification when received.
Tap to display the notification history.
Notification history is stored in the device's temporary memory, this means this history bar will be
wiped clean if the system is power cycled.
Rules button
7.
Tap to display the
with an easy to use rules engine.
⇒
Rules Manager Screen
8. Sensors button
Tap to display the
connected to your Symbio.
⇒
Sensors Manager Screen
Notes on Z-Wave
This product is a Z-Wave Plus Security Enabled Gateway device in the Central Static Controller
Role type.
This product does not support the Basic Command class and will ignore it.
Live Video button
9.
Tap to display the
Symbio is monitoring.
⇒
Live Video Screen
History button
10.
Tap to display the
sensor data.
Rules Manager
screen. This is where you can automate your smart home system
Sensor Manager
screen. This is where you can add, remove and edit devices
Live Video Screen screen. This is where you can view the real-time image
History screen. This is where you can watch past recordings and view internal