Table of Contents
Advertisement
Function
6. Pairing (Grouping)
Below pairing procedure should be done to establish communication group.
Pairing is made between a master device and rest devices.
STEP 1
Each device needs to be set to a different user number than others
STEP 2
Once pairing is done, paired devices go to stand-by display.
STEP 3
If you press 'M' button while pairing is being processed, the pairing
is canceled and these devices go to stand-by display.
Pairing is cancelled if not done within 60 seconds.
Press&hold 'M' button to go to Menu and then select "6. Pairing".
Note
-08-
Push PTT button
to select
Advertisement
Table of Contents
Need help?
Do you have a question about the X12 and is the answer not in the manual?
Questions and answers