Advertisement
Removing Collected Water (cont.)
NOTES
•
When you remove the bucket, do not touch any parts inside
the unit. Doing so may damage the product.
•
Be sure to push the bucket gently all the way into the unit.
•
When the unit is on, if the bucket is removed, the compressor
digital display shows Eb.
•
When the unit is o , if the bucket is removed, the unit will
beep 8 times and the digital display shows Eb.
2. Continuous draining
attaching the unit with a water hose (Id
included) with a female threaded end (ID: M = 1", not
included).
•
Remove the plastic cover from the back drain outlet of the
unit and set aside, then insert the drain hose through the
drain or a suitable drainage facility. (See Fig. 7 and Fig. 8)
•
When you remove the plastic cover, if there is some water in
the back drain outlet of the unit you must dry it. Make sure
the hose is secure so there are no leaks and the end of the
•
Direct the hose toward the drain, making sure that there are
•
Select the desired humidity setting and fan speed on the
unit for continuous draining to start.
NOTE
When the continuous draining feature is not being used,
remove the drain hose from the outlet, and dry the water in
the continuous drain hose outlet.
Page 10
, then the unit will beep 8 times and the
ow.
owing.
oor drain by
Ø 5/16", not
oor
3. Pour the water out.
Fig. 6
Remove the
plastic cover
rotating counter-clockwise
Fig. 7
Drain hose
Fig. 8
User Manual
Hide quick links:
Advertisement
