Table of Contents
Advertisement
prompt you the drivers do not have " digital signature" , still you can force to install.
A message appears stating that drivers were successfully installed. Click OK. Another message appears stating that the driver could not be restarted dynamically.
Restart Windows2000 to run the new driver. Click OK.
5.1.4 Windows NT4.0
The following steps describe how to install Windows NT4.0 display drivers
1.
Select Control Panel from the Main group.
2.
Select the Display icon.
3.
Select Change Display Type.
4.
Select Change from the Adapter Type area.
5.
Select Other.
6.
Place the Disc (CD Title) into Driver. Click OK.
7.
Select Install and click " YES" when the Installing Driver dialog box appears.
8.
When the Windows NT Setup dialog box appears select CDROM, and click " Continue" .
A message appears stating that drivers were successfully installed. Click OK. Another message appears stating that the driver could not be restarted dynamically.
Restart Windows NT to run the new driver. Click OK.
5.2 How to Change Color Depth and Resolution
1.
Make sure that you have installed windows95/98/2000 Driver
2.
Click on the Start box in the lower left corner and proceed to Control Panel.
3.
Inside the Control panel group , click on Display icon to open the Display Properties folder and select the Setting table
4.
Click on the pull-down arrow from the Color palette area to select color depth or adjust the sliding bar to either Less or More from the Desktop area
5.
Select OK to restart WINDOWS95 and new color depth or the new resolution takes effect.
5.3 How to Change Refresh Rate
1.
Make sure that you have installed windows95/98 Driver. Click on the Start box in the lower left corner and proceed to Setting, Control Panel
2.
Inside the Control panel group , click on Display icon to open the Display Properties folder and choose Settings click the Advance Settings choose
Adapter
3.
Click on the Refresh Rate sub window to change refresh rate
4.
Select OK and new refresh rate takes effect
Note: If your monitor is not Branded or Plug&Play, you will only see Adapter default and optimal.or even you can not see the refresh rate selection menu; Please
contact your monitor supplier to get right or compatible drivers for your monitor. Otherwise you can not select the refresh rate you wanted.
l
Refresh Rate default is Optimal.
l
If you change Refresh Rate from Optimal to another , you may be need to restart Windows 95 or 98
8
Advertisement
Table of Contents
