Parts Lists; Ordering & Repairs; Warranty - Remtron Command Pro 21T10 User Manual

Enter a new six digit unit identity number using the keypad
on the programming unit. Verify the number on the LCD
display. Press the PRG push-button on the programming
unit.
For additional programming instructions refer to the
manual supplied with the programmer.

4.4 PARTS LISTS

Accessories available for the remote control system
include:
Item
Antenna mounting kit (9 Ft.)
Antenna mounting kit (18 Ft.)
Programmer (Stand Alone)
Programmer (PC Based)
Tables 5.1 and 6.1 list the spare parts available from
Remtron for field repair of the transmitter and receiver.
Detailed parts lists and schematics are available to support
depot level maintenance activities.
4.5 ORDERING & REPAIRS
Ordering
When ordering a Remtron product use the appropriate
Remtron part number or model number, ID Code and
any other applicable information.
Orders for standard Remtron products may be placed
with an authorized representative, distributor or direct
with the factory.
Orders for special products or modified standard products
may also be placed with an authorized representative,
however, close coordination with the factory is
recommended.
SECTION 4: MAINTENANCE
Repairs
All products in need of repair should be sent directly to
the factory at the address listed below. We recommend
calling the factory for a Return Material Authorization
(RMA) number prior to sending in the equipment. A
note should be included describing the nature of the
problem and the conditions under which the problem
occurred. Also included with the returned product, should
be the name, address and phone number where the
product is to be returned and the name and phone number
of a person familiar with the problem, who we may
contact should the need arise. Products should be returned
Part Number to:
600038-1
Remtron, Inc.
600038-2
1916 W. Mission Rd.
RAC16
Escondido, CA 92029
RAC17
PH 760-737-7800

4.6 Warranty

Remtron, Inc. warrants its material handling products to
be free from defects in material and workmanship for a
period of two (2) years from the date of the original
invoice. This warranty is void if the product was used in
other than its normal and customary manner or subjected
to misuse, neglect, accident, physical damage or was
altered or tampered with by unauthorized personnel.
Remtron further warrants its Command Pro "hand-held"
Radio Remote Control products against malfunction or
breakage, excepting total destruction of the internal circuit
board, for a period of two (2) years and thirty (30) days
from the date of the original invoice.
In event of a defect or failure to perform as specified,
Remtron will, at its discretion, repair or replace the
product. This warranty does not cover the cost of shipping
and handling of the product from the customers' location
to the factory.
This warranty gives you specific legal rights and you may
also have other rights which vary from state to state.
4.3