Multi-Eye Models; To Set The Time; To Set The Date - LACOSTE 3-HAND Series Operating And Maintenance Original Instructions

H
J
S
Figure A
D
H
S
Figure B
1, 2, 3 – Crown positions
H – Hour hand
M – Minute hand
S – Seconds hand
J – 24 Hour hand
T – Date hand
D – Day hand
Crown positions:
Position 1 – Normal running position; crown pushed into case.
Position 2 – To set DATE: Rotate crown clockwise.
Position 3 – To set TIME: Rotate crown in either direction.

To set the time:

1. Pull crown out to position 3 when the second hand is at the
12 o'clock position, watch stops.
2. Turn crown clockwise to advance the hour and minute hands
until the day hand is set to the desired day of the week, if
applicable for your model. The day hand will not move back
by turning the crown counterclockwise.
(4) MULTI-EYE MODELS – TYPE A
With day/date with or without 24-hour hand without pushers
1 – 2 – 3
D
T
1 – 2 – 3
T
Legend
3. Turn crown in either direction to move hands to desired
time. The 24 hour hand J is moving correspondingly with the
hour hand. When setting the minute hand, advance it 4 to 5
M
minutes ahead of the desired time and then turn it back to
the exact time.
4. Push crown back in to position 1; watch restarts, now set to
correct time.

To set the date:

1. Pull crown out to position 2.
2. Turn the crown counterclockwise to set the date hand.
Do not set the date hand between 9.00pm and 2.00am.
The date hand will not move back by turning the crown
clockwise.
3. Push crown back in to position 1; watch restarts, now set to
correct date.
M
6