Slide Buckle Adjustments; Normal Position; Pull The Metal Plate With Tools; Move The Slide Buckle To The Correct Position - LACOSTE 3-HAND Series Operating And Maintenance Original Instructions

Slide Buckle Adjustments

The mesh bracelets found on select models feature a hooking
Slide Buckle Adjustments
Slide Buckle Adjustments Slide Buckle Adjustments
jewelry clasp that allows you to size the bracelet by sliding
the pin-bar half of the clasp along the bracelet to achieve a
customized fi t.

1. Normal Position

1. Normal Position
1. Normal Position 1. Normal Position
Above: Open mesh bracelet side with pin-bar half of sliding
clasp locked in position.
To size the bracelet:

2. Pull the metal plate with tools

2. Pull the metal plate with tools
2. Pull the metal plate with tools 2. Pull the metal plate with tools
1. Use tool such as a small fl at-head screwdriver to pop open
metal plate on pin-bar half of clasp, releasing the clasp position
locking mechanism.

3. Move the slide buckle to the correct position

3. Move the slide buckle to the correct position
3. Move the slide buckle to the correct position 3. Move the slide buckle to the correct position
2. Slide pin-bar half of clasp along the mesh bracelet in either
direction to desired position.
4. Close the metal plate
4. Close the metal plate
4. Close the metal plate 4. Close the metal plate 3. Close metal plate, locking the pin-bar half of the clasp in new
position on the bracelet.
(9) SPECIAL FEATURES
MESH BRACELET SLIDING CLASP
12