PRIMEX
MDE Installation Instructions
STEP 5
Measure installation position
Measure distances from edges of enclosure to outside of adjacent
studs, floor and ceiling.
STEP 7
Paint and affix lid
Place paintshield, paint drywall, and install frame extender
(optional) and lid and frame sub-assembly.
FOR MORE INFORMATION CONTACT:
1.604.881.7875
1.604.881.7835
T
F
www.primex.com
452-3113
PRODUCT
MODEL CODE
STEP 6
Measure, mark, cut and mount drywall
Use measurements from step 5 to mark out drywall. Cut out marked
area of drywall. Fit drywall over top of the installed enclosure base
and secure.
STEP 8
Finish installation
Remove paintshield, install locks (optional), and install telecom
components (modem, ONT, UPS, eg.).
Verge MDE
P2100, P3000, P4200, P6300
Fit everything. Together.