Nokia 7 plus Get Started

Get Started

Nokia 7 plus
TA-1055 / TA-1046
1. Insert the SIM and memory
card
1. Open the SIM and memory card tray by putting
the provided tray opener into the hole next to the
tray.
2. Put the nano-SIM into slot 1 located on the tray
with the contact area face down. If you have a dual
SIM variant, you can either put a second SIM or a
memory card into slot 2. If you have a single SIM
variant, you can only put a memory card into slot 2.
3. Slide the SIM and memory card tray back into
place.
Use only original nano-SIM cards. Use of
incompatible SIM cards may damage the card or the
device, and may corrupt data stored on the card.
Note: On dual SIM capable devices, both SIM1
and SIM2 slots support 4G networks. However, if
your SIM1 and SIM2 are both LTE SIM cards, the
primary SIM supports 4G/3G/2G networks, while
the secondary SIM can only support 3G/2G. For
more information on your SIM cards, contact your
service provider.
PKB2N55049A V1.0
xxxxxxxxxx
Main cameras
Fingerprint
sensor
Loudspeaker
Microphone
Charger connector
2. Charge the battery and switch
the phone on
Plug a compatible charger into a wall outlet, and
connect the cable to your phone. Your phone
supports the USB-C cable. You can also charge your
phone from a computer with a USB cable, but it may
take a longer time.
If the battery is completely discharged, it may take
several minutes before the charging indicator is
displayed.
To switch your phone on, press and hold the power
key until the phone vibrates. The phone guides you
through the setup.
USB-C USB micro-B
Microphone
Audio connector
Flash
Proximity sensor
Earpiece
SIM card/
MicroSD card
Front camera
Volume keys
Power/Lock key
3. Learn more about your new
Nokia phone
For an online user guide and troubleshooting help,
go to www.nokia.com/mobile-support.