Philips DS1600 Short User Manual

Always there to help you
Register your product and get support at
www.philips.com/welcome
Question?
Contact
Philips
Short User Manual
2013 © WOOX Innovations Limited. All rights reserved.
Philips and the Philips' Shield Emblem are registered
trademarks of Koninklijke Philips N.V. and are used by
WOOX Innovations Limited under license from Koninklijke
Philips N.V.
DS1600_05_SUM_V1.0
DS1600_05_SUM_V1.0.indd 1-4
Important
DS1600
Safety
Only use attachments/accessories specified by the manufacturer.
Use only power supplies listed in the user manual.
The product shall not be exposed to dripping or splashing.
Do not place any sources of danger on the product (e.g. liquid filled objects, lighted
candles).
Where the plug of the Direct Plug-in Adapter is used as the disconnect device, the
disconnect device shall remain readily operable.
Warning
•
Never remove the casing of this apparatus.
•
Never lubricate any part of this apparatus.
•
Never place this apparatus on other electrical equipment.
•
Keep this apparatus away from direct sunlight, naked flames or heat.
•
Make sure that you always have easy access to the power cord, plug, or adaptor to disconnect the
apparatus from the power.
Notice
Any changes or modifications made to this device that are not expressly approved by
WOOX Innovations may void the user's authority to operate the equipment.
This product complies with the radio interference requirements of the European
Community.
Your product is designed and manufactured with high quality materials and components,
which can be recycled and reused.
Before using your product, read all accompanying safety information.
When this crossed-out wheeled bin symbol is attached to a product it means that the
product is covered by the European Directive 2002/96/EC.
Please inform yourself about the local separate collection system for electrical and
electronic products.
Please act according to your local rules and do not dispose of your old products with
your normal household waste. Correct disposal of your old product helps to prevent
potential negative consequences for the environment and human health.
Environmental information
All unnecessary packaging has been omitted. We have tried to make the packaging
easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and
polyethylene (bags, protective foam sheet.)
Your system consists of materials which can be recycled and reused if disassembled by
a specialized company. Please observe the local regulations regarding the disposal of
packaging materials, exhausted batteries and old equipment.
The making of unauthorized copies of copy-protected material, including computer
programs, files, broadcasts and sound recordings, may be an infringement of copyrights
and constitute a criminal offence. This equipment should not be used for such purposes.
"Made for iPod, " "Made for iPhone, " and "Made for iPad" mean that an electronic
accessory has been designed to connect specifically to iPod, iPhone, or iPad, respectively,
and has been certified by the developer to meet Apple performance standards. Apple
is not responsible for the operation of this device or its compliance with safety and
regulatory standards. Please note that the use of this accessory with iPod, iPhone, or iPad
may affect wireless performance.
iPod and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries.
iPad is a trademark of Apple Inc.
Class II equipment symbol:
CLASS II apparatus with double insulation, and no protective earth provided.
Note
•
The type plate is located on the bottom of the apparatus.
Amplifier
Rated Output Power 2 x 2.5 W RMS
Signal to Noise Ratio > 55 dBA
MP3 Link Input 650m V RMS
General information
AC/DC switching adapter Model: AS250-050-AI400
Input: 100-240 V~, 50/60 Hz, 1.2 A;
Output: 5 V 4 A;
Operation Power Consumption < 23 W
Standby Power Consumption < 1 W
USB Charging DC 5 V ≤ 1000 mA
iPod/iPhone Charging DC 5 V ≤ 2100 mA
Dimensions:
- Main Unit (W x H x D) 225 x 149 x 96 mm
Weight:
- Main Unit 0.83 kg
Switch connectors
1 Slide the switch to the right.
2 Press the dock connectors to the front or back to select
the lightning or 30-pin connector.
2013/9/13 15:07:00