Table of Contents
Advertisement
NOTICE/BEFORE INSTALL.ATION
;J
' - - - - - - - - - - - - \ ' )
The heater must be installed by a qualified service
person according to this installation instruction.
Check your local building codes for the proper method
of installation. In the case of absence of local codes,
this heater should be installed in accordance with the
National Fuel Gas Code ANSI Z223-1.
Check local codes or, in the absence of local codes,
the current CAN/CGA-B149 INSTALLATION
CODE.
a.
Due to high temperatures, the appliance should
be located out of traffic and away from furniture
and draperies.
b. Children and adults should be alerted to the
hazards of high surface temperatures and
should stay away to avoid burns or clothing
ignition.
"WARNING" Do not operate appliance with the
panel(s) removed, cracked or broken. Replacement
of the panel(s) should be done by a licensed or
qualified service person.
The appliance, when installed, must be electrically
grounded in accordance wittl local codes or, in the
absence of local codes, with the National Electrical
Code, ANSI/NFPA 70 or with the current CSA C22.1
CANADIAN ELECTRICAL CODE.
WARNING:
THIS APPLIANCE IS EQUIPPED
WITH A THREE-PRONG (GROUNDING) PLUG
FOR YOUR PROTECTION AGAINST SHOCK
HAZARD AND SHOULD BE PLUGGED DIRECTLY
INTO A PROPERLY GROUNDED THREE-PRONG
RECEPTACLE. Do not cut or remove the grounding
prong from the plug.
2
~(J
. . '
\".'
.
Installation and repair should be done by a qualified
service person. The appliance should be inspected
before use and at least annually by a qualified
service person. More frequent cleaning may be
required due to excessive lint from carpeting,
bedding material, etc. It is imperative that control
compartments, burners and circulating air
passageways of the unit be kept clean.
-14 -
Hide quick links:
Advertisement
Table of Contents
