Impact Test Equipment Ltd. Building 21 Stevenston Ind. Est. Stevenston Ayrshire KA20 3LR T: 01294 602626 F: 01294 461168 E: sales@impact-test.co.uk Test Equipment www.impact-test.co.uk Test Sieves & Accessories www.impact-test.com Test Sets to International Standards www.impact-testsets.co.uk www.impact-test.co.uk www.impact-test.com www.impact-testsets.co.uk...
Furthermore all the norms and rules the operator should be aware of or consult for correct use of the machine and/or test performance can be found in the manual. This responsibility is entrusted to the installer and Laboratory or Site Manager where the machine is installed. The Constructor is available to provide further information. www.impact-test.co.uk www.impact-test.com www.impact-testsets.co.uk...
The manufacturer recommends that the instructions, procedures and recommendations in this manual and the work safety legislation in force be scrupulously adhered to, even with the use of appropriate protection devices (whether individual or part of the machine). www.impact-test.co.uk www.impact-test.com www.impact-testsets.co.uk...
- Zero calibration with depuration of the time for the impulse to go through the probes. - Calibration of a default time value. - Acquisition, processing and filing of the tests data in a up to 30,000 samples storage capacity. - Mini USB interface for PC connection. www.impact-test.co.uk www.impact-test.com www.impact-testsets.co.uk...
20° C tempe rature and a low humidity percentage. 2.03 OPERATOR INTERFACE Switching on In order to turn the appliance on, press the F1 key for about 5 seconds. www.impact-test.co.uk www.impact-test.com www.impact-testsets.co.uk...
Page 9
• Download of the data through the mini USB port of the tester. The main screen will be as the below picture: START OF THE MEASURING CONFIGURATION MENU DATA MENU DATA ARE SENT THROUGH USB CONTINUOUS AUTOMATIC MODE SAVE www.impact-test.co.uk www.impact-test.com www.impact-testsets.co.uk...
Page 10
F2 (+) and F3 (-) keys. • MODE: the appliance includes two operating modes: a single mode, through which only a set of four mediated readings is performed (thus creating only one value of measuring); a continuous mode, through www.impact-test.co.uk www.impact-test.com www.impact-testsets.co.uk...
START CALIBRATION EXIT This screen suggests the operator should put the cylindrical sample (provided with the kit) between the probes in order to measure the second point of the characteristic curve. In order to obtain a better www.impact-test.co.uk www.impact-test.com www.impact-testsets.co.uk...
Page 12
CD (if enclosed) or downloadable form manufacturer website at: http://www.prolific.com.tw/US/ShowProduct.aspx?p_id=225&pcid=41 The transmission can be captured by any terminal emulator (such as Hyper Terminal) with the following configuration: • Baud: 115200; • data bits: 8 www.impact-test.co.uk www.impact-test.com www.impact-testsets.co.uk...
Page 13
In order to recharge the batteries, always and only use the battery charger provided with the kit. In case of fault or malfunction, contact the manufacturer/reseller to change the battery charger itself. ⇒ ⇒ ⇒ ⇒ Never connect the battery charger to the appliance if the batteries are not www.impact-test.co.uk www.impact-test.com www.impact-testsets.co.uk...
Spare parts: C370-02 Couple of transmitting and receiving probes, 55KHz. C370-06 Couple of cables (each 3.5 mt long) to connect the probes. C370-07 Tube of grease to better coupling the probes and the material under test. www.impact-test.co.uk www.impact-test.com www.impact-testsets.co.uk...
For further information on your local recycling site please contact your local council or city waste treatment department. The developer, as producer of electrical and electronical devices, will provide to finance the recycling and treatment services for deplete devices that will come back through these recycling sites, according to the local statement. www.impact-test.co.uk www.impact-test.com www.impact-testsets.co.uk...