Set The Gain Setting; Set The Pwm Setting; Set The Flowmeter Sensitivity - Eagle KEE E15 Operator's Manual

E15h SPRAYER- Controller Setup V 1.0 11/05

5.4 SET THE GAIN SETTING

• Press MENU
• Press ENTER to select SETUP
• Press LINE 3, the focus is on CONTROLLER SETUP
• Press ENTER to CONTROLLER SETUP
• Press LINE 3, the focus is on GAIN SETTING
• Press ENTER to edit GAIN SETTING. An asterisk (*) will appear.
• Press INC/DEC buttons to set the value. Depending on the type of regulator
valve selected in Section 5.1, will determine what range of values (mS/%) are
available, there are four values to select from.
• Press ENTER to accept the changes

5.5 SET THE PWM SETTING

• Press MENU
• Press ENTER to select SETUP
• Press LINE 3, the focus is on CONTROLLER SETUP
• Press ENTER to CONTROLLER SETUP
• Press LINE 3, the focus is on PWM SETTING
• Press ENTER to edit PWM SETTING. An asterisk (*) will appear.
• Press INC/DEC buttons to set the value. Depending on the type of regulator
valve selected in Section 5.1, will determine what range of values (%) are
available, there are four values to select from.
• Press ENTER to accept the changes

5.6 SET THE FLOWMETER SENSITIVITY

Note: DeFault is STANDARD
• Press MENU
• Press ENTER to select SETUP
• Press LINE 3, the focus is on CONTROLLER SETUP
• Press ENTER to CONTROLLER SETUP
• Press LINE 3, until the focus is on FLOWMETER SENSITIVITY
• Press ENTER to edit FLOWMETER SENSITIVITY. An asterisk (*) will appear.
• Press INC/DEC buttons, to select between STD and LOW
• Press ENTER to accept the changes
58