Download  Print this page

Detaching The Table-top Stand From The - Sony XBR-75X905E Instruction Manual

Hide thumbs


Attach the Wall-Mount Bracket (not supplied) using the screws (not supplied).
• If using an electric screwdriver, set the torque at approximately 1.5 N·m {15 kgf·cm}.
Detaching the Table-Top Stand from the TV
To detach the Table-Top Stand from the TV, remove the screws
• Do not remove the Table-Top Stand for any reason other than to install corresponding accessories on the TV.
• Be sure the TV is vertical before turning on. To avoid uneven picture uniformity do not power on the TV with the LCD
panel facing down.
• When attaching the Table-Top Stand again, be sure to fasten the screws (previously removed) to the original holes
on the rear of the TV.
Wall-Mount Bracket
(not supplied)
Screw (not supplied)


Table of Contents

This manual is also suitable for:


Comments to this Manuals

Symbols: 0
Latest comments: