Page 2
10. Rotating handle 11. Pressure release valve 12. Pump actuator SPECIFICATION Model No: ..........................K12310 Max lifting capacity (retracted) ..................900 kg (2000 lbs) Min lifting radius .......................930mm (36.6”) Max lifting height ......................1800mm (70.8”) Base exterior size ......................270mm x 270mm ..............................(10.6”...
Page 3
UTE CRANE 900KG (2000LB) General Safety Warnings WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. WARNING: The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions or situations that could occur.
Page 4
K12310 - Ute Crane 1) Before Starting The K12310 Ute Crane is designed specifically for use with loading and unloading heavy loads safely on to the pickup bed/tray of small trucks, utilities or larger trucks as well garage floors. Any other use is deemed to be a case of misuse.
Page 5
UTE CRANE 900KG (2000LB) Assembling the boom extension to the boom 1. Slide the boom extension (2) in to the boom (3) (Fig. 6). 2. Align the hole in the boom extension (2) with the hole in the boom (3) that suits the load to be lifted and secure in place using the bolt, flat washer, spring washer and nut (supplied).
Page 6
If this product has materials or workmanship defects (other than defects caused by abnormal or non warranted use) you can, at your cost, send the product to place of purchase, an authorised Kincrome service agent or one of Kincromes addresses for repair or replacement.
Need help?
Do you have a question about the K12310 and is the answer not in the manual?
Questions and answers