Viewing Previous Routes And Destinations - Garmin RV-BBT600 Series Owner's Manual

Select > Last Spot.

Viewing Previous Routes and Destinations

Before you can use this feature, you must enable the travel
history feature (Device and Privacy Settings, page
You can view your previous routes and places you have stopped
on the map.
Select > Where I've Been.
Adding Shortcuts and Widgets to the Home
Screen
While the RV HUB remote is undocked, you can add application
shortcuts and widgets to any of the home screen pages. You
cannot add items to the docked home screen.
1
From the home screen, swipe left or right to select a home
screen page.
2
Select .
3 Swipe left or right to view additional applications and widgets.
4
Hold an application or widget, and drag it to the desired
location on the home screen.
Customizing the Device
Map and Vehicle Settings
Select Settings > Map & Vehicle.
Vehicle: Sets the icon that represents your position on the map.
Go to www.garmingarage.com
Driving Map View: Sets the perspective on the map.
Map Detail: Sets the level of detail on the map. More detail may
cause the map to draw slower.
Map Theme: Changes the color of the map data.
Map Tools: Sets the shortcuts that appear in the map tools
menu.
Map Layers: Sets the data that appears on the map page
(Customizing the Map Layers, page
Audible Cautions and Advisories: Enables an audible alert to
be played for certain types of cautions and advisories, such
as speed limit changes, various road conditions, and state
and country borders. This option is available only when you
are using an RV vehicle profile.
myMaps: Sets which installed maps the device uses.
Enabling Maps
You can enable map products installed on your device.
TIP: To purchase additional map products, go to
http://buy.garmin.com.
1
Select Settings > Map & Vehicle > myMaps.
2
Select a map.
Navigation Settings
To open the Navigation settings page, from the main menu,
select Settings > Navigation.
Calculation Mode: Sets route preference.
Avoidances: Sets road features to avoid on a route.
Custom Avoidances: Allows you to avoid specific roads or
areas.
Environmental Zones: Sets the avoidance preferences for
areas with environmental or emissions restrictions that may
apply to your vehicle.
Restricted Mode: Disables all functions that require significant
operator attention.
Customizing the Device
17).
for more icons.
11).
GPS Simulator: Stops the device from receiving a GPS signal,
and saves battery power.
Calculation Mode Settings
Select Settings > Navigation > Calculation Mode.
The route calculation is based on road speeds and vehicle
acceleration data for a given route.
Faster Time: Calculates routes that are faster to drive but can
be longer in distance.
Shorter Distance: Calculates routes that are shorter in distance
but can take more time to drive.
Off Road: Calculates a direct line from your location to your
destination.
Display Settings
Select Settings > Display.
Color Mode: Allows you to select day or night color mode. If you
select the Auto option, the device automatically switches to
day or night colors based on the time of day.
Brightness: Allows you to adjust the display brightness.
Display Timeout: Allows you to set the amount of idle time
before the screen turns off while the remote is using battery
power.
NOTE: This setting has no effect while the remote is docked.
While docked, the screen automatically dims when the
vehicle triggers the dashboard illumination to dim, and the
screen automatically turns off when you turn off the vehicle.
For more information about connecting the dock to the
vehicle illumination wire, see the RV-BBT600
Series Installation Instructions.
Wallpaper: Sets the home screen wallpaper.
Auto-rotate Screen: Enables the screen to rotate automatically
between portrait and landscape display modes based on the
device orientation.
Screenshot: Allows you to take a picture of the device screen.
Screenshots are saved in the Screenshot folder of the device
storage.
Traffic Settings
From the main menu, select Settings > Navigation > Traffic.
Traffic: Enables traffic.
Current Provider: Sets the traffic provider to use for traffic data.
The Auto option selects the best available traffic data
automatically.
Subscriptions: Lists the current traffic subscriptions.
Optimize Route: Enables the device to use optimized alternate
routes automatically or upon request
on Your Route, page 11).
Traffic Alerts: Sets the traffic delay severity for which the
device displays a traffic alert.
Units and Time Settings
To open the Units and Time settings page, from the main menu,
select Settings > Units & Time.
Current Time: Sets the device time.
Time Format: Allows you to select a 12-hour, 24-hour, or UTC
display time.
Units: Sets the unit of measure used for distances.
Position Format: Sets the coordinate format and datum used
for geographical coordinates.
Language and Keyboard Settings
To open the Language and Keyboard settings, from the main
menu, select Settings > Language & Keyboard.
(Avoiding Traffic Delays
15