Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Yunlink Manuals
  4. Wireless Access Point
  5. HWAP80-P48
  6. User manual

Yunlink HWAP80-P48 User Manual

11ac 1200mbps outdoor access point
Hide thumbs

Advertisement

Quick Links

Download this manual
User Manual of 11ac 1200Mbps Outdoor Access
Point
HWAP80-P48
:
This is the user manual of 11ac 1200Mbps Outdoor Access Point, which will approximate guide you how to set and
apply the Outdoor Access Point, it provide a convenient graphical interface for network construction and maintenance
person, as well as a user through a simple and accurate operation, and configuration management of the ceiling
wireless access point.
s t
1
Hardware Instruction
A P S e t u p

Advertisement

loading

Related Manuals for Yunlink HWAP80-P48

Summary of Contents for Yunlink HWAP80-P48

  • Page 1 User Manual of 11ac 1200Mbps Outdoor Access Point HWAP80-P48 This is the user manual of 11ac 1200Mbps Outdoor Access Point, which will approximate guide you how to set and apply the Outdoor Access Point, it provide a convenient graphical interface for network construction and maintenance person, as well as a user through a simple and accurate operation, and configuration management of the ceiling wireless access point.
  • Page 2 A P I n t e r f a c e : RST: Reset Button, it make AP revert to default data after press it 15 seconds. WAN/PoE: Gigabit WAN Port, connect with ADSL modem or Internet mainly. It will be LAN port under Outdoor Access Point and WiFi Repeater operation mode.
  • Page 3 P 5 Setting of computer’s IP address 3) Input 192.168.188.253 into IE browser, then pop up the login page, the default login user name: Admin, Passwords: admin, pls do following P6 P6 Login : WEB GUI interface Setting: 1) Status After login, then P7 Device Status will be showed:...
  • Page 4 P7: Device Status In this ceiling Outdoor Access Point, the default operation mode is AP mode. Then in 2.4G Wireless Setting, GUI configuration page showed as below: User can configure the SSID, password, band width, channel here, then Apply to finish.
  • Page 5 P8. 2.4G Wireless setting 5.8G Wireless Setting GUI configuration setting showed as P8: P9 5.8G Wireless Setting LAN Setting to configure the DHCP or Fix IP...
  • Page 6 P10 LAN Setting AP location setting: can mark where the AP set up, and AP name as P11: P11 AP Postion setting...

  • Page 7: Wizard Configuration

    2) Wizard Configuration: Click Wizard in Status page, will pop up following page to configure the operation mode: There are four operation mode of this ceiling Outdoor Access Point, and there are explanation for each operation mode for better application. P12 Operation mode 1.
  • Page 8 P13. WAN setting in Gateway Mode P14 Wireless Setting in Gateway Mode When click Next, then will complete the Gateway mode setting and show following picture:...
  • Page 9 Complete the setting in Gateway Mode When return to Status, the page showed as follow: P16 Status in Gateway Mode 2. WiFi Repeater mode Click WiFi Repeater operation mode in Wizard, then following page will pop up, and choose the right SSID to bridge,...
  • Page 10 then next. P17 Repeater Mode After click Next button, then should configure the wireless settig as follow, then click Next to finish: P18 Wireless Setting in Repeater Mode Click Return button, will back to Status, show Repeater mode data, show fail or success, and user can configure this data in this page if required.
  • Page 11 P19 Status in Repeater Mode Pls note, when click wireless relay setting, following page will pop up, you can make change from here easy: P20 Wireless Relay Setting 3. WISP Operation mode: Click WISP operation mode in Wizard, then will pop up the configure page, pls set the WISP operation mode based on the stepes showed in picture:...
  • Page 12 P21 WISP Mode Configure the right WAN setting in WISP operation mode, then next. P22 WAN setting in WISP mode Configure wireless data showed as follow:...
  • Page 13 P23 Wireless Setting in WISP mode Then complete and back to status, will show the connection fail or success, then can configure the data based on request: P24 Status in WISP mode...
  • Page 14 Remark: When click WAN Setting, will pop up following picture: P25 WAN setting in WISP mode 4. AP Operation mode: Set the wireless data, AP Location info as required, then click next to continue and enter into LAN setting. After LAN setting, complete the AP mode configuration and back to Status: P26 Wireless setting in AP Mode...
  • Page 15 P27 LAN Setting in AP Mode P28 Status in AP Mode...
  • Page 16 3) Advanced Setting: In advanced setting, user can check the Outdoor Access Point’s firmware version, working status, 2.4G wireless, 5.8G Wireless, LAN Status, upgrade firmware, Reset... Let’s Click Advanced Setting in status page, will show return home, Setup Wizard which we showed before. Let’s shown mode in Device Status, 2.4G Wireless, 5.8G Wireless, Network and Management.
  • Page 17 P31 5.8G Wireless Status P32 LAN Status 2.4G Wireless Setting: In this part, will show the 2.4G Basic Setting, Virtual AP, Access control and Advanced Setting:...
  • Page 18 P33 Basic Setting in 2.4G Wireless 2G Wireless Analyzer: Mainly to analyze the AP’s singal strength in some channel, to make user more easy to choose the right channel and avoid the wifi interface.
  • Page 19 P34 Wireless Analyzer Virtural AP: There are 3 virtural AP in 2.4G wireless, if need virtural SSID, then users can configure it showed in following picture:...
  • Page 20 P35 Virtual AP 2.4G Access Control: Mainly show MAC allow or deny: P36 MAC Access Control 2.4G Advanced Settings: In this page, will show the regional, RF Power, Max user access...
  • Page 21 P37 Advanced Setting 5.8G Wireless Setting: Almost same as 2.4G Wireless:...
  • Page 22 P38 5.8G Wireless Setting Network setting: In this page, mainly to show the LAN setting and VLAN as follow:...
  • Page 23 P39 Network Setting...
  • Page 24 P40 Tag VLAN Setting Management: In this part, show the system time, Logs, upgrade firmware, system, user info. And we show System time, how to upgrade firmware and system page to users: P41 System Time P42 Firmware Upgrade...
  • Page 25 P43 System info Share Internet and Obtain IP address automatically Set computer’s TPC/IP as Obtain an IP address automatically, Obtain DNS server address automatically as following picture showed. the computer will obtain the IP address from router or base station to get Internet. Tr o u b l e S h o o t i n g : F 1 The Failure phenomenon and solution Failure phenomenon...
  • Page 26 connect with AP, LAN port connect with computer Pls check the IP address of computer and Outdoor Access Point to see whether they are in same networking segment, The method is click “start”-“Run” input“cmd” ， p ing 192.168.188.253 to test the Outdoor Access Point connectivity.
  • Page 27 FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.