Sie bleibt dauerhaft erhalten, kann aber jederzeit überschrieben werden. 4. Montage Die Montage des DWS 1 erfolgt an der Wand. Lösen Sie zunächst die abnehmbare Mon- tageplatte (B) von der Platine (siehe Kapitel 15 “Anschlussschema / Conn. Diagram” auf Seite 6).
Art Weißes Aufputzgehäuse Maße 70 x 40 x 16 (B x H x T in mm) Material ABS Allg. technische Daten Betriebstemperatur -20°C +50°C Schutzart / Normen IP 67 Bestellnummer, -bezeichnung 09 501 197, Wassersensor DWS 1 3931247/2009.03/B - Technische Änderungen vorbehalten!
DWS 1 Water Stop Sensor 8. General Information The DWS 1 water stop sensor is a component of the Dupline installation system and per- mits the detection of water leakage and the transmission of the alarm via the Dupline bus.
Dimensions 70 x 40 x 16 (W x H x D in mm) Material ABS General technical data Ambient temperature -20°C +50°C Encl. protection type / IP 67 standards Order number, description 09 501 197, Water sensor DWS 1 3931247/2009.03/B - The right to make technical changes reserved!
Doepke 15. Anschlussschema / Conn. Diagram Sollten Sie Fragen zu diesem Produkt In case of queries concerning this product oder zum Dupline-System haben, wen- or the Dupline system please contact: den Sie sich bitte an: Doepke Schaltgeräte GmbH & Co. KG Stellmacherstraße 11...
Need help?
Do you have a question about the DWS 1 and is the answer not in the manual?
Questions and answers