Breezenet Pro.11 Series Features - BreezeNET PRO.11 Series User Manual

1.2. BreezeNET PRO.11 Series Features

Following is a partial list of the features in the
• IEEE 802.11 Compliant – All
compliant with the final IEEE 802.11 specification for wireless LANs,
and thus support interoperability with other 802.11 compliant vendors.
• Fully integrated product family – One high-performance Access Point
for all products in the series.
• Increased Throughput – Up to 2 Mbps data throughput; the best figure
in the market!
• Translation Bridging – Support for both translation and transparent
bridging as defined in the IEEE 802.1.h and RFC 1042 standards.
• Seamless Roaming – Network connection is maintained while roaming
between overlapping coverage areas. Transmission and reception can be
continued while moving at high speeds with no data packet loss or
duplication.
• Load Sharing – Traffic is equally distributed among all Access Points
in the area.
• Redundancy – In co-located cell environments, upon failure of an
Access Point, stations will switch to other available Access Points.
• LED Display – Power, Network Activity, and WLAN Load or Signal
Quality LEDs indicate the current status of the unit.
• Upgrading – Simple, quick, and free software upgrades via TFTP.
• Future-proof Investment – All "infrastructure" items in the PRO.11
Series line offer Flash updates.
BreezeNET PRO.11 Series
Introduction To The BreezeNET PRO.11 Series
BreezeNET PRO.11 Series
BreezeNET PRO.11 Series
1-5
:
units are fully
User's Guide