Advertisement
Quick Links
Wireless Charger X5MAX Instruction
Product Features & Specifications
1. PC fireproof material, leather surface texture, and non-slip silicone mat bottom;
2. Dual-coil support mobile phone charging anyway;
3. Intelligent recognition lighting design, automatic identification of charging equipment.
Material: PC fireproof material
Transmission power: 10W （MAX） Input interface: Micro*2
Transmission distance: ≤8MM
Dimension:130*73*12.5mm
Without bracket
Using Guide
Please install the base before using this product. The base is inserted in the direction of the arrow into the
wireless charging transmitter slot.
This product contains two micro input interface, according to the phone placed flat or horizontal or vertical
charging different ways, USB power cable just insert one of the micro input interface to recharge.
Connect the adapter to charge
1. Connect the wireless charger to the adapter with USB cable correctly.
2. When Power on, the two white indicator of wireless charger will shortly flashing and off, the product is in
standby mode.
3. Put the charged device with wireless charging function on the wireless charger, when charging, then indicator
will keep white light on.
4. After the charged device is fully charged or removed, the indicator of the wireless charger will off
automatically.
Input Voltage/Current: 5V/2A 9V/1.7A
Output Voltage/Current: 5V/1A 9V/1.1A
Charging efficiency: ≥73%
Weight: 99.5g including bracket
（插示意图）
Advertisement
Summary of Contents for Vatro X5MAX
- Page 1 Wireless Charger X5MAX Instruction Product Features & Specifications 1. PC fireproof material, leather surface texture, and non-slip silicone mat bottom; 2. Dual-coil support mobile phone charging anyway; 3. Intelligent recognition lighting design, automatic identification of charging equipment. Material: PC fireproof material Input Voltage/Current: 5V/2A 9V/1.7A...
- Page 2 5. If the indicator of the wireless charger is in quick flash mode, it indicates that the wireless charger is in abnormally alarmed condition or that foreign objects such as metal are placed on the wireless charging transmitter. ( For example: ①The transmitter coil and the receiver coil are not in good position; ②transmitter or receiver is abnormal, etc.) Note: At present, Samsung support the function of the full charging feedback, feedback as above, the rest of the phone with full charging while wireless charging transmitter will not be prompted.
- Page 3 3、Please do not use X5max at severe high temperatures, humid or corrosive environments, to avoid circuit damage and leakage currents. 4、Please do not places X5max too close with magnetic strip or Chip magcard (ID, debit card), to avoid the magcard failure.