Related Manuals for Kinpo A200A
Summary of Contents for Kinpo A200A
- Page 1 Kinpo Electronics, Inc. User's Guide to the Modem Icon Utility Model No.: A200A(A2) Version : E1 Date : Oct. 22, 1999 Software: Itex...
- Page 2 User's Guide to the ITeX Modem Icon Utility The Modem Icon Utility will allow the user to monitor the ADSL modem's connection and ATM/ADSL states, setup the PVC values, and run a few diagnostics tests. Getting Started Before proceeding forward, please make sure that the modem has been installed correctly.
- Page 3 Placing the mouse cursor on the Modem Icon will show a summary of the modems status by displaying the modem's state, upstream line rate and downstream line rate. Monitoring the ADSL Modem ITeX ADSL Test Application Pointing to the Modem Icon, and clicking on the left mouse button will display the ITeX ADSL Test Application window.
- Page 4 Modem Icon Menu Pointing to the Modem Icon and clicking on the right mouse button will display the Modem Icon options window. From this window, the user will be able to: a) "Disconnect" the modem from or "Connect" the modem to the central office equipment; b) Run a diagnostic test to test the modem;...
- Page 5 ADSL State - displays the current status of the modem. These states are: Connected, Connecting, and Disconnected. Protocol - The protocol section displays which ADSL standard is being used. Transmit /Receive Rate - In the Transmit and Receive section, the user will be able to see what kind of line rate is being achieved for both upstream and downstream line rates.
- Page 6 ATM Transmission Side Statistics - displays the number of packets transmitted. ATM Receive Side Statistics - displays the number of good and bad packets received. Configuration Menu The Configuration menu will allow the user to check or change the ADSL network modems PVC values for RFC1577 and RFC1483.
- Page 7 FCC Information Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Need help?
Do you have a question about the A200A and is the answer not in the manual?
Questions and answers