Function Setting - SBJ AC-800 Pro User Manual

Function Setting

A. Volume Level Adjustment
Rotate the power knob to desired volume level when power on the
phone.
B. Activate / Inactivate the (VOX)
User can can talk and communicate with each other without pressing and holding the
PTT button. There are 3 levels of selection (01-03).
1. Press MENU key to enter menu Vo setting.
2. Press ▲ or ▼KEY to set sensitivity level (Fig 6-8) or OFF(Fig 5).
 The higher sensitivity level, higher VOX/ MIC sensitivity.
 The Lower sensitivity level, Lower VOX/MIC sensitivity.
3. Press POWER key to confirm the setting and return to main screen.
Remarks:
-- The default setting of VOX function is OFF.
-- When setting VOX ON, "VOX" shown on the LCD.
B. Activate / inactivate the Auto-scan of Channel
1. Press MENU key to enter menu Scan setting(Fig 9).
Press POWER key to start scanning, LCD will display "Scan"icon and channel
2.
number of changed scanning(Fig 10).
3. Channel scanning stops once the signal is detected.
C. Activate / inactivate the Monitoring Function
User can activate the monitoring function under the weak signal so as to receive all the
signals in this channel.
2. Press MENU key to enter menu M setting(Fig 11).
3. Press POWER key to activate the monitoring function and return to the main screen
automatically.
 Activate the monitoring function: Low anti-interference capability, longer distance
can be achieved.
 Close the Monitoring Function: High anti-interference capability, shorter distance
can be achieved.
Remarks:
-- Under the monitoring status, press the MENU key, it will close the monitoring function
automatically.
-- Under the monitoring status, Press PTT key, call key, ▲ or ▼KEY, the monitoring
status is unchanged.
D. Selecting the Call Tone
7
Fig 5
Fig 6
Fig 7
Fig 8
Fig 9
Fig 10
Fig 11