Main Screen
1. VOX
2. Scan
3. roger beep
4. Transmitting status (TX) or receiving status(RX)
5. Channel
6. Key Lock
7. Subcode
8. Battery Level Indicator
-- Low Battery:
-- Charging:
Remarks:
When you turn on the unit, LCD display will show all icons. After 1 second, the unit will go to
standby mode.
Other Features of Various Symbols Shown on the LCD.
Symbol
Battery Installation
1. Switch off the radio, rotate belt clip clockwise /anticlockwise by 90 degree.
2. Open the battery compartment door.
3. Insert batteries according to the anode-cathode signs shown inside battery
compartment
4.
Close the battery compartment door.
Note:
1. Don't mix new and old, different styles, alkaline or rechargeable or different capacity
battery.
2. There is a danger of explosion if battery is incorrectly replaced. Replaced only with the
Blinks, need battery change or recharging.
battery icon will be displayed but not blinks.
Major feature
Channel Selection
Subcode Selection
Auto-scan of Channel
Monitor Function
Call Tone Selection
Key Beep
Roger Beep
Power Selection
VOX Function
4